How do I get the installer code for Vista 20P?

The default installer code on a Honeywell Vista-20P is 4112. If you have lost your installer code, you can alternatively use the backdoor method to get into programming. This is done by pressing and holding the * and # keys within 50 seconds of powering on the system.

What field is installer code for Vista 128?

4140
The factory default installer code for the Honeywell Vista BPT control panels is 4140. Press star (*) followed by 00. The installer code can be changed in this mode.

How do I change master code Vista 20P with installer code?

To change the code, enter in the following command:

[Current Master Code] + [8] + [02] + [New Master Code] + [New Master Code Again]
The keypad will produce a long tone to confirm that the code has been successfully changed.
Test the code.
[New Master Code] + [3]
The system should begin to arm.
[New Master Code] + [1]

What is the default installer code?

5555
The default installer code for a DSC is 5555. The installer code is the code that is used to get into the DSC programming mode so you can set the system up and make changes to panel programming. Having the installer code is the most important part of setting up the system.

How do I change my Vista installer code?

How do I change the installer code on a Honeywell Vista?

Go into programming using the current installer code followed by 800.
Enter *20.
Enter the new four digit installer code.
Enter *99 to exit programming.

How do I change my Vista 128 code?

How Do I Change the Master Code on a VISTA 128BPT?

Signify a code command. On your keypad (preferably an alphanumeric keypad), enter in the following:
Identify the user number.
Provide the new code.
Do not add new user.
Confirm the new code.

Can you change master code with installer code?

The easiest method is to use the Installer Code to change the Master Code. But if you don’t know the Installer Code, you can use the backdoor method to reset the code. Then use the reset Installer Code to change the Master Code.