How do I get the TPMS light to go off?

How do I get the TPMS light to go off?

Drive the car at 50 mph for about 10 minutes. This should reset the sensor, and the next time you start the car the TPMS light should be off. Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it.

Why won’t my low tire pressure light go off?

What if corrected the tire pressure and my tire pressure light still won’t turn off? When the TPMS warning light comes ON and stays ON, this indicates a low tire pressure condition in one or more tires. Inflating the tire to the recommended tire pressure found on the door placard should cause the light to turn OFF.

How do you reset the tire pressure light on a 2010 Honda Civic?

To reset the tpms in a 2010 honda civic, look for the tpms button beneath the left side of the dashboard. Press and hold it until you see the low tire pressure/tpms light blink twice. After this, the calibration process will be finished once you drive about 20 minutes.

What can cause a tire pressure light to come on?

In general, the light will come on when the air pressure in one or more tires is outside the recommended range. Low pressure could result from a leak or simply from the tendency of a tire to lose about a pound of air pressure every month, as well as a pound for every 10-degree drop in temperature.

What does the TPMS light mean on a Honda?

Tire Pressure Monitoring System
TPMS stands for Tire Pressure Monitoring System. If one of your vehicle’s tires isn’t at the suggested pressure, the sensor goes off and the light on your dash alerts you to add air to your used Honda Accord or other model.

Why is my tire pressure light on when my tires are fine Honda Civic?

The reason you have a tire pressure monitoring system in your Civic is to detect a flat tire. Or possibly more than one flat tire. If the light comes on while you are driving, this is the likely cause. Use a tire gauge to check the pressure in all four of the vehicle’s tires.

How do you reset the tire pressure light on a 2010 Honda Accord?

Scroll to the vehicle Settings screen, and select it. Select TPMS Calibration….Models with steering wheel buttons:

1. Press MENU.
2. Select Customize Settings.
3. Select TPMS Calibration.
4. Select Initialize.
5. Select Yes.
6. Press MENU to exit.

How do you reset the tpms light on a 2011 Honda Civic?

To reset the tpms on the 2011 honda civic make sure the tire pressure is correct, then turn on the vehicle. Now hit the reset button that is to the right of the steering wheel and wait ten minutes. In some cases you may need to hold the button down till the light flashes.

How do you reset the tire pressure light on a 2011 Honda CRV?

To reset the 2011 honda cr-v tire pressure go to menu, customize settings, select tpms calibration, select initialize, then select yes.