How do I install a wemo?

How do I install a wemo?

1. Step One: Turn Off the Power. This is one of the most important steps and it should be done before anything else.
2. Step Two: Remove the Existing Light Switch.
3. Step Three: Prepare Your Wires for the WeMo Switch.
4. Step Four: Install the WeMo Light Switch.
5. Step Five: Connect It to Your Wi-Fi Network.

How do I connect my wemo device to Wi-Fi?

1. Step 1: Launch the Wemo app and tap Log In.
2. If you don’t have existing Wemo devices, you’ll be routed to this page instead.
3. Step 4: Once connected, open the Wemo app again.
4. Step 6: Select your home WiFi and enter the WiFi password when prompted.
5. Once it’s connected, the app will discover the Wemo devices.

Can’t connect wemo to Wi-Fi?

Wemo device not detected or unreachable Make sure that the Wemo device isn’t blinking orange (see the wifi light status indicator section). If so, try to restart the app. If this doesn’t work, try to unplug and plug your Wemo device again. Your wemo device will try to reconnect to your home network automatically.

How do I reconnect my WeMo plug?

Step 1: Unplug the Wemo Mini from the power outlet. Step 2: Wait for 5 seconds. Step 3: Plug the Wemo Mini back into the power outlet.

How do I reconnect my Wemo plug?

How do you reset a Wemo link?

WeMo Motion Senors, Switches and Links: Unplug the WeMo. Hold down the reset button. Plug the WeMo in. Release the reset button a few seconds after it starts flashing amber. Once the WeMo is flashing amber and green the reset is complete.

How do I Reset my Wemo Light Switch?

First make sure the light switch has power to it. Press the Restart button (large button right side) for 1 second and then release. Press the Reset button (smaller button left side) for 5 clock seconds and release when the light switch status LED begins blinking amber rapidly. Allow 45-90 seconds for WEMO to restore and reboot.

Do more with Wemo dimmer?

Your Wemo Dimmer can do so much more than dim. With the Long Press feature, you can set any number of other Wemo devices to respond to a two-second press of the Dimmer button. You can use Long Press to turn all Wemo lights and devices on or off. Or put all your Wemo lights into Away Mode when you leave for vacation.

Does Wemo Light Switch dim?

No , the Wemo 3-Way Light Switch is not dimmable and cannot be used in a circuit with dimmer switches. This will cause the Wemo to malfunction or not work at all. 8. Does the Wemo 3-Way Light Switch support fluorescent lights?