How do I log into my Arris TG862?
Enter http://192.168.0.1 into the address box, and press the Enter key. The Login page appears. NOTE: By default the LAN IP address is 192.168.
How do I access my Arris modem settings?
Accessing Arris Modem Setup Typically, you can do this by accessing the device through your wireless or wired home network by connecting to its IP address, http://192.168.0.1. Simply enter that address into the address bar on your browser, whether on your computer, phone or tablet.
How do I setup my Arris TG862?
To Install TG862
- If the modem includes a battery, install the battery with the following procedure:
- Connect the phone cable from one of the telephone ports of the TG862 to the telephone base.
- Connect the Ethernet cable from the Ethernet port of the TG862 to the Ethernet port of the computer.
How do I find my Arris router password?
Viewing Your Current Wireless Network Settings 0.1, and press enter. Next, you are presented with the “System Basic Setup” page. Your current WiFi network name is displayed in the “Wireless Network Name (SSID)” field. Your current WiFi network password is displayed in the “Pre-Shared Key” field.
How do I reset my Arris TG862?
Factory Reset With The Reset Switch
- Carefully insert the tip of a pen or an unwound paperclip into the reset switch and press on to it.
- Hold down the Reset switch for at least 15 seconds and release it. NOTE: Performing a reset will take the TG862 out of Bridge Mode, if it had been previously enabled.
How do I check my Arris modem log?
To View the Logs Enter http://192.168.100.1 into the address box. The Cable Modem Status page will appear. From the top, click the Logs tab. The Logs page appears.
What is the default password for ARRIS modem?
password
By default, the username is admin, and the password is password. For network security purposes, ARRIS recommends changing the router default admin user name and password after logging onto the SBR-AC1200P for the first time.
What is the password of the day for ARRIS modems?
ARRIS password of the day is a remote backdoor known since 2009. It uses a DES encoded seed (set by the ISP using the arrisCmDoc30AccessClientSeed MIB) to generate a daily backdoor password. The default seed is MPSJKMDHAI and guess what – many ISPs won’t bother changing it at all.
How do I fix my Arris modem WiFi?
Most Arris routers can be reset using the Reset Button.
- Locate the Reset Button on your Arris modem or router (typically found on the back of the device).
- When you locate the button, press and hold it for at least 15 seconds.
- Wait for the reset to complete—this process can take a few minutes.
Why is my Arris modem not working?
Try to reset the modem by unplugging the power cord from the modem and wait 1 to 2 minutes. Try to reset the modem by unplugging the power cord from the modem and wait 1 to 2 minutes. If the cable modem has been moved to a different outlet please contact customer service to relocate the modem.
Is Arris a wireless router?
Arris Modem is a device that establish a connection between your home network and your internet service provider. It works as a wireless router or as well as wired line network. It provides good internet speed to the user. You can use Arris Modem for setup your wireless network and other settings.
What is the default password for Arris tg862g router?
The default username for your Arris TG862G-CT is admin.The default password is . Enter the username & password, hit “Enter” and now you should see the control panel of your router. If above login credentials doesn’t work with your Arris TG862G-CT router then try this method Try different ID/password combinations that are widely used by
What do the lights on my Arris router mean?
The standard Arris factory settings for the indicator lights are the yellow light at the DS position, which indicates that the modem is connected to the Internet at high speed, and the green light at the DS position, which indicates an ultra-high speed Internet connection.
What modem router works with Comcast?
ARRIS SURFboard SBG10 – Our choice