How do I log into my ProCurve Switch?

How do I log into my ProCurve Switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

What is the default password for HP ProCurve Switch?

Re: Default Password HP Procurve Switch 2824 NO default password is set when the switch is new. The default configuration is quit simple: One default Vlan (Vlan1) with IP DHCP enabled on this Vlan, and it has 2 users built in: Manager & Operator with NO password set but you can configure other user names (Optional).

What is Aruba switching?

Aruba switches bring performance and reliability to the mobile-first campus. These industry-leading switches are scalable, secure, and feature HPE Smart Rate multi-gigabit ports for high-speed connectivity.

What is HP Procurve switch?

The HP Procurve managed 24-port switch has 10/100BASE-TX autosensing per port and 2 open transceiver slots for media flexibility. The HP Procurve switch 2524 is ideal for low-cost, managed 10/100 connectivity with uplinks. features.

How do I setup an HP Managed switch?

To do so, do one of the following:

1. Enter setup at the CLI Manager level prompt. HP Switch# setup.
2. Select Run Setup in the Main Menu of the menu interface.

How do you set up a ProCurve switch?

To configure IP addressing. Switch Configuration… If multiple VLANs are configured, a screen showing all VLANs appears instead of the following screen. The Menu interface displays the IP address for any VLAN. If user uses the CLI to configure the IP address on a VLAN, use the CLI show ip command to list them.

How do I factory reset my HP switch?

To execute the factory default reset on the switch, perform these steps:

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to blink, release the Clear button.

What is the product description of the HP ProCurve 2910al 24g Ethernet switch?

Product description. HP ProCurve 2910al-24G Ethernet Switch with 24 x 10/100/1000 ports and has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910al switch supports up to four optional 10-Gigabit (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class.

Can a 2910al switch be used as a NAT switch?

The 2910al is a layer 3 switch, meaning it can’t do any NAT (that’d be layer 4+). So, you can’t route between private IP addresses and public IP space. I’m assuming you’re trying to use 172.0.0.0/16 for private addresses, which they actually aren’t (they belong to AT).

How do I route a 2910al to another router?

Basically, you can route between e.g. 172.16.1.0/24 and 172.16.2.0/24 on the 2910al at wire speed but you’ll also require a NAT router for Internet access. In case you run your WAN link on a VLAN connected via the 2910al you should not configure an IP address on the VLAN to prevent any form of routing – the 2910 is no firewall.

Can I use AT IP address on 2910al?

You’ll need to use proper private IP addresses from RFC 1918 like 192.168.0.0/16 or 172.16.0.0/12. Otherwise, your LAN clients won’t be able to connect to those AT addresses if they wanted to. Basically, you can route between e.g. 172.16.1.0/24 and 172.16.2.0/24 on the 2910al at wire speed but you’ll also require a NAT router for Internet access.