How do I open my daytek clothesline?
Press the dual latches inward and slide downwards until all 4 arms are in a vertical position and are secured in the slots located in the top cap. 3. Lift the support ring from the ground socket and lift out the clothesline.
How do I change my daytek clothesline?
To replace a line on your Daytek Rotary Clothesline, you must remove the Tensioner Block Tops of the effected line. To remove the Tensioner Block Tops, a) Place your index finger on top of the Tensioner Block and over the Nut to ensure that the Nut is held in position.
Can you tighten a washing line?
If your frugal and eco-friendly clothes drying system–your clothesline–is sagging, but doesn’t need to be replaced, you can tighten it fairly easily.
How does a retractable clothesline work?
Retractable clotheslines. These little devices are kind of like a spool – the clothesline itself is wound up tightly within a housing that protects it from weather and keeps it clean. And like a tape measure, you can pull out the line, and then allow it to coil itself back up when you’re done with it.
How do you replace line on daytek clothesline?
What should be in the carton before installing the clothesline?
Please check the carton contains all the required parts before installing the clothesline. Your carton should contain the following: 1. Daytek 4/5/6 Outdoor Retractable Clotheslinex 1 2. Wall to Wall fixing pack including detailed installation instructionsx 1 (Fixing pack provided is for installing to bricks and timber walls only.
What is the ideal height of the clothesline?
The ideal height of the clothesline should be approximately 50mm from the users head height to the underside of the horizontal arms (with the wind brake engaged). Helpful Hints Important 15 Year Product Warranty a) Engage the wind brake mechanism while pegging and unpegging washing.
What is the warranty for Dayton tooling products?
Dayton Tooling will repair or replace free of cost within 10 years from the date of purchase. (Receipt of purchase required). The PVC line cord is covered by a 2 year warranty from the date of purchase. Any evidence of misuse or incorrect adjustment will void the warranty. To claim a product warranty, please contact Dayton Tooling directly.