How do I reset my Brother printer driver?

How do I reset my Brother printer driver?

Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

How do I reset my Brother printer error?

Easiest and Best Way to Reset Brother Printer: +1-802-357-7752

1. Go to the “Settings” option and press “All Settings”.
2. After that, go to the “Initial Setup” section and press the “Reset” button.
3. Press the Up and Down keys to display the type of reset function, and then press the reset function key that you want to use.

How do I reset my Brother HL l2380dw printer?

Reset the Network Settings to the Factory Settings

1. Press. (Settings) > All Settings > Network > Network Reset.
2. Reset Network? will be displayed. Press Yes.
3. Reboot OK? will be displayed. Press Yes for two seconds to confirm. The machine will restart.

How do I reset my Brother HL 3170cdw printer?

The Solution:

1. Open the top lid of the printer and leave ajar.
2. Press and hold the “Secure” and “X Cancel” buttons.
3. Use the arrow keys to select the cartridge model you would like to reset and press “OK”.
4. Press the UP arrow to reset the cartridge.
5. Once reset is selected you will see “ACCEPTED” on the screen.

How do I reset my Brother HL 3170cdw?

Reset the settings to factory default

1. Disconnect the network cable from the machine or the network settings (such as IP address) will not be reset.
2. Press ▲ or ▼ to select Reset Menu. Press OK.
3. Press ▲ and Cancel at the same time.
4. Press OK when Settings Reset appears.
5. Press OK when Restart Printer? appears.

How do you reset the drum counter on a Brother HL 3170CDW?

Brother HL-3170CDW – Reset Drum

1. Press the Up arrow key while holding down “Go” on the printer’s control panel.
2. Press the Up or Down arrow key to display Drum Unit.
3. Press the Up or Down arrow key to display the colour of the drum unit that you replaced.
4. Press the Up arrow key for “Reset” to reset the drum counter.

How do I reset my Brother HL L2350DW printer?

Reset Your Brother Machine

1. Press or to display the [Initial Setup] option, and then press OK.
2. Press or to display the [Reset] option, and then press OK.
3. Press or to choose the type of reset you want to perform, and then press OK.
4. Press .
5. Press for [Yes]. The machine will restart.

How do I reset my Brother HL L2300D printer?

Brother HL-L2300D Toner Reset

1. Press and Hold the Power button until the machine turns off.
2. Open the Toner Door.
3. Press and Hold the Go button until step 5.
4. Press the Power button.
5. Release the Go button when the Toner, Paper, and Drum lights are lit.
6. Press the Go button 9 times.