How do I reset my directv Genie client?
Resetting your DIRECTV Genie and Genie Mini restores local channels. Unplug your receiver’s power cord from the electrical outlet, wait 15 seconds, and plug it back in. Press the Power button on the front panel of your receiver. Wait for your receiver to reboot.
How do I get my directv genie to work?
Follow the steps below to connect the DIRECTV Genie to the TV.
- Connect the DIRECTV Genie™ HD DVR to the main TV. Power on the TV using the TV remote control. Connect the HDMI cable to the Genie HD DVR and the main TV.
- Connect the DIRECTV Genie HD DVR to other TVs. ( Optional) If you are using a DIRECTV® Ready TV.
Why does my directv Genie say this location is not authorized?
It could be as simple as, you’re not authorized to watch the channel you’re trying to watch. It may not be in your programming package. However, this message can pop up on a channel you used to watch, and that’s frustrating. It means that the access card inside your receiver needs new authorizations.
Does directv still have the genie?
DIRECTV Genie, available only from DIRECTV, is a state-of-the-art HD DVR that lets you enjoy full HD DVR service in every room of your home – without needing a separate receiver DVR in every room. Learn more about the DIRECTV Genie HD DVR and Genie Mini.
How do I reset my DIRECTV wireless client?
With the client on, press and hold the red reset button for approximately 30 seconds. Yes, 30 seconds. They really don’t want you doing this by mistake. This should return the client to a virgin state where you can re-add it and redo everything.
Why does my DIRECTV not work?
If your DirecTV receiver won’t turn on, try this. Instead of getting up to press the power button or unplug and replug the small box in, you can often fix this by holding the channel up button on the remote for three to five seconds. After you hold the channel up button the receiver should power up and work normally.
What does DIRECTV code 721 mean?
channel not purchased
If you see code 721 – “channel not purchased” it can mean two things: Either that channel is not part of your programming package, or your service just needs to be refreshed.
Can you buy your own DIRECTV Genie?
There is no purchase to own option, as DirecTV did away with that when the 1st Genie launched. If you have a regular Genie (HR34, HR44, HR54), then the first wireless Client is not self-install. This is because it requires a wireless video bridge (WVB) hardwired into the coax to server as the antenna.
How do I know which DirecTV Genie receiver I have?
Each of these have different sizes from other Genie clients, so it’s easy to tell the difference between these and the C51 and C61 clients. It’s really easy to find out which DIRECTV Genie receiver you have. All you have to do is locate the green sticker on the bottom of the client.
What is the difference between the Genie C31 and C41?
Since C31 clients have only been available a few months, they are fairly rare. The C41 replaced it, and features added support for the DIRECTV RC71 remote. There also are two more Genie clients – the C51 and C61, which aren’t shown here. Since all of these Genie clients look familiar, it can be hard to tell the difference.
What is the difference between the C61 and c61k DirecTV Genie receivers?
These two DIRECTV Genie receivers are practically identical in appearance except for one thing – the C61 features the new AT globe logo on its face. There are practically no differences inside, either. (The most significant difference is that the two were on separate production runs.) What about the C61K 4K client? And the wireless clients?
Which Genie remote should I use with which receiver?
The Genie remote should be used with all other receivers. Both remote controls will operate either client in IR mode, but you need the right RF remote if you plan to place your client behind your TV. Now that you know which remote controls you need for what, let’s take a closer look at how to identify these Genie clients from one another.