How do I reset my Dlink router from my phone?

How do I reset my Dlink router from my phone?

Press and hold the ‘reset’ button; while doing so, power on the device again and keep holding the ‘reset’ button for another 10 seconds. Then release the button and wait until device restarts.

How do I reset my Dlink router remotely?

How to Reset a Router Remotely with Your Browser

1. Open a web browser and connect to your home router as an administrator.
2. Once you’re logged into your router as administrator, you can usually find the option to reboot your router in the Advanced section of the router’s menu.

What do I do if I forgot my Dlink password?

paperclip, hold down the tiny reset button on the back of your router for about five seconds. Your router lights will blink to confirm the factory reset. You can now use the router’s default password to log into its Web configuration screen (look in your router manual if you can’t remember what this is).

How do I reset my D-Link adapter?

How to Reset a D-Link

1. Straighten a paper clip so you have at least an inch of straight wire.
2. Locate the “Reset” button on the D-Link router.
3. Insert the paper clip into the Reset hole to press the button.
4. Release the Reset button.

How do I reset my Dlink DWR 116 router?

HOW DO I RESET MY DWR-116 ROUTER TO FACTORY DEFAULT SETTINGS? – Ensure the router is powered on. – Press and hold the reset button on the rear of the device for 10 seconds. The reset process will take up to 60 seconds to complete before you can access the DWR-116 again.

How do you reset your router to factory settings?

How to Reset Router From Configuration Page

1. Type your router’s IP address into any web browser’s search field.
2. Enter your username and password when prompted.
3. Go to System or System Tools.
4. Look for Restore or Factory Default.
5. Click Restore or Reset and OK to confirm.
6. Wait for the router to reboot.

How do I reset my router without unplugging it?

Starts here2:08How To Remotely Restart Your Router from Any Browser – YouTubeYouTube

How do I automatically restart my router?

Starts here4:48How to reboot your router automatically when Wi-Fi goes down!YouTube

How do I reset my D-Link DWR 932c?

Step 1: Ensure that the device battery is properly inserted and the device is powered ON. Step 2 : Use a paper clip to press and hold the reset button indicated “3” for 6 seconds to reboot the device.

How do I reset my D-Link ac1200?

How do I reset my router to factory default settings?

1. Step 1: With the router on, insert the end of a paper clip into the pinhole highlighted below.
2. Step 2: Hold the paper clip down for 10 seconds and release.
3. Step 3: The unit will reboot automatically. Once the WLAN light stops blinking, the unit has been reset.
4. Note:

How do I reset my Dlink DWR 921?

To reset the D-Link DWR‑921 to its default settings, you have to do the following steps:

1. Switch on router.
2. Press Reset button for at least 10 seconds.
3. Device restarts automatically.
4. Default settings have been restored.