How do I reset my Fujitsu scanner?

How do I reset my Fujitsu scanner?

Reset the sheet counters in the following procedure:

1. Confirm that the scanner is connected to the computer, then turn on the scanner.
2. Open the [Software Operation Panel] window.
3. From the listing on the left, select [Device Setting].
4. After replacing a consumable, click the [Clear] button for the replaced consumable.

What is a consumable in a scanner?

These include flatbed units, scanner carrier sheets and barcode scanning modules. …

How do you change the roller on a Fujitsu fi 7160?

(1) Replacing the Brake Roller

1. Remove all documents from the ADF paper chute (Feeder).
2. Pull the ADF release tab towards you to open the ADF.
3. Remove the brake rollers.
4. Remove the brake rollers from their shaft.
5. Attach new brake rollers on the shaft.
6. Attach the shaft.
7. Close the ADF.
8. Reset the brake roller counter.

How do you reset the roller on a Fujitsu fi 7600?

Reset the Pick Roller counter From the tree listing on the left, select [Device Setting]. -> The following panel appears. Click the [Clear] button beside the [Pick Roller] counter. Click the [OK] button on the confirmation panel displayed.

How do I fix my Fujitsu scanner?

Please try the following steps to establish the connection:

1. Restart your ScanSnap.
2. Connect the USB cable directly.
3. Turn-off antivirus software.
4. Use another USB port.
5. Use another USB cable.
6. Disconnect other USB devices.
7. Use ScanSnap Support Tool.
8. Delete the device driver.

How do I change the rollers on my Fujitsu scanner?

Replacing the Pick Roller

1. Turn off the scanner and wait for at least 15 minutes.
2. Unplug the power cable.
3. Remove all documents from the ADF paper chute (feeder).
4. Pull up the ADF release tab to open the ADF.
5. Open the sheet guide.
6. Remove the pick roller closer to you.
7. Remove the pick roller away from you.

How do you reset the roller on a Fujitsu fi 6130?

Click the [Clear] button beside the [Brake Roller] counter. Click the [OK] button on the confirmation panel displayed. -> The counter is reset to 0. Click the [OK] button on the [FUJITSU Software operation Panel] window.