How do I reset my HP V1910 24g switch?

How do I reset my HP V1910 24g switch?

Restore to factory default configuration….HP V1910-48G JE009A Factory reset – Password recovery capability enabled.

1. Connect switch cable to COM.
2. Open Putty on COM 38400 – 8 – 1 – N.
3. Powercycle the switch.
4. Press Ctrl-B at boot to enter extended boot menu.
5. Skip current system configuration.
6. Reboot.

How do I reset my HP 1820 24g?

To reset the switch, unplug and plug in the power cord (power cycling)….Restoring to Factory Defaults

1. Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the. switch.
2. Continue to press the Reset button until the Fault LED light begins to flash.
3. Release the Reset button.

How do I reset my HP ProCurve 2510 24?

How to reset a ProCurve 2510-24g to default settings

1. Press in both the Clear and Reset buttons (tiny buttons on the left edge)
2. Release the Reset button after the port lights come on (~2 seconds)
3. When the Self-Test LED starts flashing (to the left of the Clear and Reset buttons), release the Clear button.

How do I reset my HP 24G Switch 1920?

To execute the factory default reset on the switch, perform these steps:

1. Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch.
2. Continue to press the Reset button until the Fault LED light begins to flash.
3. Release the Reset button.

How do I reset my HP 2920?

Using Clear/Reset

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to flash, release the Clear button.

How do I reset my HP 24g switch 1920?

How do I factory reset my HP ProCurve 2626?

Factory Reset When enabled, the switch can be reset to factory defaults by depressing the “Clear” and “Reset” buttons together, releasing the “Reset” button while holding the “Clear” button down, and releasing the “Clear” button as soon as the “Test” light begins to flash rapidly.