How do I reset my Jandy control panel?

How do I reset my Jandy control panel?

How do I Reset a Jandy AquaLink System?

1. Press the “Menu” button.
2. Scroll to and highlight “System Setup” using the arrow keys. Press “Enter.”
3. Scroll to highlight “Clear Memory,” then press “Enter.” You have now reset your AquaLink system.

How do I reset my Jandy Aquapure?

Each time a flow sensor is unplugged and plugged back in again the computer inside the unit must be reset by turning the power ‘off’ and then ‘on’.

How do I program my Jandy AquaLink RS?

Basic Programming: To set a particular piece of equipment to turn on and off at a predetermined time, press the MENU button, press the forward arrow button to scroll to the PROGRAM menu, press ENTER, and then press the button for the equipment that you want to program.

How do I reset my Jandy pool lights?

To synchronize multiple lights to the same color mode, you will need to reset to the beginning of the color mode sequence. With the lights ON, turn them OFF for five (5) seconds, then turn ON again. All of the lights will reset to the Alpine White color mode.

What does 6700 Rev C mean?

If the “6700 REV C” code DOES appear, then the problem is at least in either the POWER CENTER or WIRING between the power center or remote, but it is possible that the original remote failed, too – we have seen the Power Center and Remote fail simultaneously.

How long does a Jandy salt cell last?

Generally, a salt cell lasts for about 10,000 hours, which is usually around five years for most home pool owners. If your cell is close to or exceeds the 10,000-hour mark, and you notice any of the above signs, it could very well need replacement.

What does cell reversing mean on AquaPure?

AquaPure automatically cleans the Cell electrodes once every 3 hours by reversing polarity. This does not interrupt the production of Chlorine.

How do I reset my LED pool light?

To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on.

How do I contact Jandy for troubleshooting?

If you’re still getting the same error after you’ve completed the recommended steps, I would advise that you call Jandy directly for further troubleshooting. They would be more than happy to take your call. They can be reached at 800-822-7933. Good luck! I am getting error code 145 ( high salinity), but the salinity reading is a ridiculous 19 gpl.

What is Jandy Aqualink PDA?

The Jandy AquaLink PDA automation system provides feature-rich, complete pool and spa control…. This affordable and convenient device delivers complete pool/spa control. The AquaLink Z4… Upgrade your automation system to AquaLink RS Power with Conversion Kits. Customize automation solutions for any application.

What is a service code on a Jandy aquapure chlorinator?

If you have a Jandy AquaPure 700 or 1400 chlorinator, there’s a chance you may have come across a service code (or error code) before. A service code is a three digit number that appears on the display panel of an AquaPure Control Box, letting you know if your AquaPure unit is experiencing any problems.