How do I reset my Payne furnace?

How do I reset my Payne furnace?

The two switches are located above the three burners. If the flame “rolls out” instead of into the heat exchanger, the sensors detect the heat and shut off the gas. Manually reset the sensor by turning off the furnace and pressing the center tab down on the back, upper side, of the switch.

Are there coils in a furnace?

Furnace coils are not only typically inside the furnace assembly, but may be in their own casing, as well. Most of the problems associated with dirty coils come from the lack of access homeowners have to clean them.

How do I fix error code 33?

Fix #1 – Restart your System:

1. Sometimes, the error code 33 occurs due to temporary faults.
2. You have to click the Start button → click the Power button, and choose the Restart option.
3. If the error persists, you just shut down your system and turn it on again.

What does code 31 mean on paypayne furnace?

Payne furnace showing code #31. Pressure switch (HK06NB123) failure (or open too long.) Here’s what I have done — removed both lines from the pressure switch and blown air through them. The lower one makes a gurgle sound but air passes through the trap. The upper line blows into the housing without restriction.

What does the error code 34 mean on a furnace?

Fault Codes 14 or 34 point to an ignition lock out or an ignition fault. This indicates a problem with the gas supply. The manual gas supply shutoff valve must be in the open position, and the control switch on the gas valve must be on. Fault Code 24 points to the violet colored furnace fuse.

Why buy a Payne furnace?

As a convenience, Payne furnaces contain a built-in diagnostic system that can alert you when something goes wrong. These furnaces simply show an error code to help you narrow down the problem quickly.

When should you call a furnace repairman for an error code?

As such, there are certain parts of your furnace you should leave to a qualified technician. In fact, Payne recommends skipping the troubleshooting and calling a repairman right away if your furnace shows error codes 12, 21, 22, or 23. Error code 24 indicates a blown fuse or wiring short.