How do I reset my Volvo Maintenance overdue?

How do I reset my Volvo Maintenance overdue?

Step 1: Reset Maintenance Message

1. Press and hold trip reset button,
2. turn on the ignition,
3. wait for the yellow warning light to start blinking,
4. release the button and wait for confirmations sound,
5. turn off the ignition,
6. turn the ignition back on to check if the service message is gone.

How do you reset the maintenance light on a 2007 Volvo s80?

1. Insert key in to ignition but don’t turn it yet.
2. Press and Hold the odometer trip counter reset button.
3. Turn ignition switch to “run” position (Position II)
4. After Service light flashes, release odometer reset button.
5. Turn ignition off.
6. Turn ignition back on to confirm reset.

How do you reset the check engine light on a Volvo?

Turn the Volvo’s ignition key to the “II” position in the ignition. Wait for the light on the diagnostic tool to stop flashing. The codes on your Volvo’s electronic control unit should be cleared at this point and the check engine light will reset itself.

How to reset the service light on a Volvo S60?

How To Service Light Reset in Volvo S60, S80, V70, XC70, XC90. Step 1. Confirm that you have the trip computer in T-1 mode; Step 2. Put the car key, and turn the ignition to position I ; Step 3. Press and hold trip meter reset button until the trip meter reads “0.0”. Do not release trip meter reset

How do I reset the maintenance message on my Volvo?

To reset the Volvo maintenance message without a fault code reader and a service reset tool, do the following: Put your key in the ignition and turn it to position one. Next, turn your trip computer to trip one. Press and hold the trip computer while turning your key to position two.

What kind of car is a Volvo S60 service required?

2010-2013 Volvo S60 Service Required Minder Light Reset – The Volvo S60 is a medium-high sedan produced by the Swedish car manufacturer Volvo. The car has a four-door and five-seater body and the exterior lines put it in the D-segment, and re-propose the traditional Volvo style in a modern way.

How do you reset the service light on a Chevy Silverado?

1 Put your key in the ignition and turn it to position one. 2 Next, turn your trip computer to trip one. 3 Press and hold the trip computer while turning your key to position two. 4 The center arrow will flash red three times. 5 On the third flash, you will let go and an alert will note that you just reset your service light.