How do I set up my avtech DVR for remote viewing?

How do I set up my avtech DVR for remote viewing?

Plug and Play

1. Connect RJ45 cable to a router hooking up with Internet.
2. Download the AVTECH mobile app EagleEyes – and install.
3. Register an account for EagleEyes Cloud Services on EagleEyes.
4. Scan the barcode (on the monitoring display or on the device itself, depending on the device you have).
5. Enter the Captcha Code.

How do I access my avtech IP camera?

Step6: Open Internet Explorer on the PC, and enter the IP address and port number in the URL column to access the camera. The format is http://ipaddress:portnum, such as http://192.168.30.1:88 in our example. Step7: Enter the default user name (admin) and password (admin) to access the camera.

How do I reset the password on my avtech DVR?

AVTECH DVRs reset

1. With a tweezers close the contact between the pins.
2. Turn on the DVR and wait until you hear a beep.
3. Remove the tweezers while the DVR is still on.
4. Wait until the DVR restarts.
5. Use the admin/username and password to login.

What is DHCP in DVR?

This article works for Zosi cameras and DVRs / NVRs. DHCP is a type of internet networking approach. It stands for Dynamic Host Configuration Protocol. This setting enables your router to obtain the static IP address on the DVR and broadcast that IP to the app so it can locate your DVR.

How can I watch my DVR online without static IP?

Step1: Login Camera on Web Browser > Now Go to Config Tab > Network > Put HTTP Port and Server Port – By default HTTP Port 80 assign (i.e 81 and 6036)> Check mark on use the Following IP Address > Assign IP Address on Camera as given example > Apply.

What is the default password of DVR?

DVR default password list (2020)

DVR	USER	PASSWORD
Hikvision	admin	12345
Honeywell	Admin	123456
Ivio	admin
Multitoc	admin	88888888

Do I need a static IP for DVR?

While both the IP addresses have their advantages and disadvantages, but when it comes to a security camera or confidentiality of online resources, you should go for a Static IP address. This is primarily because a Static IP is much better when it comes to online security.

Should DHCP be on?

IMPORTANT: The IP Address has to be within the DHCP Reservation range. This is because you cannot set an IP reservation outside the DHCP range. QUICK TIP: The DHCP Server should be enabled because disabling it will make your router work as a switch, allowing only one (1) computer to have Internet access.

Is static IP necessary for CCTV?

Also, a static IP address for security cameras allows you to access your camera remotely, and it can help you customize the security you need. Moreover, static IP addresses are necessary for devices that need constant access.