How do I setup a Belkin wireless access point?

How do I setup a Belkin wireless access point?

How to change a Belkin router to AP mode

1. Connect a computer to the Belkin router and launch a web browser.
2. Visit the following router configuration page: 192.168.2.1.
3. You are prompted to enter a username and password.
4. Go to Wireless > Use as Access Point.
5. Click Enable and Apply Changes.

How do I access my Belkin Access Point?

Open your web browser, such as Chrome, Firefox, or Edge. In the Address bar, enter either http://router or 192.168. 2.1 (this is the default IP address for Belkin routers). Log into the router using the admin password.

How do I use my Belkin router as a range extender?

Setting up a wireless bridge is a fairly straightforward process.

1. Double-check that all routers involved support wireless bridging.
2. Connect a computer to the main router using an Ethernet cable.
3. Open a Web browser and type the router’s IP address in the address bar.

How do I Configure my Belkin wireless router as an access point?

Configuring your Belkin wireless router as an access point is useful in situations where you want to expand your network using your extra Belkin router. Before you begin: Connect your computer to the router which you will configure as an access point. Make sure that it is powered ON.

How to configure a wireless router to serve as an access point?

Connect your computer to the router which you will configure as an access point. Make sure that it is powered ON. QUICK TIP: The LED on the port of the router will flash once an Ethernet cable is connected properly. By configuring a wireless router to serve as an access point, the Internet port on the router should no longer be used.

How do I connect my AP to my wireless network?

Open a web browser to access the router’s web-based setup page. For instructions on how to access the router’s web-based setup page using a Windows® computer, click here. If you’re using a Mac® computer, click here. Go to Wireless > Channel and SSID and configure your AP’s wireless network name (SSID).

Do I need to upgrade or update Belkin software?

UPGRADES AND UPDATES. While Belkin is not required to do so, Belkin may provide you with upgrades or updates to this Software.

https://www.youtube.com/watch?v=DbaaGWKqmBQ