How do I turn off the voice on my 6160V?

How do I turn off the voice on my 6160V?

When initially setting up the 6160V, a prompt will be displayed of “VOICE CHIME?” Press the number 1 to enable voice chime mode or the number 0 to disable the voice chime mode. Press the star (*) key to save your selected voice chime selection.

How do you turn the volume up on a 6160 keypad?

To adjust the volume: Press [#] FUNCTION + [0] VOICE + [2] VOLUME keys, then press the desired volume control key [3] ↑(up) or [6] ↓(down).

How do you use Ademco alarm keypad?

Go to a keypad, and within 60 seconds of power-up, press the “*” and “#” keys at the same time. This will put the panel into programming mode. The display should show either “00” or “20”, indicating program mode. If not, repeat the power-off /power-up steps and try again.

How do I turn off the Chime on my home alarm?

The first way is to press and hold the “Chime” button on the keypad for two seconds. The second way is to enter the command [*] [4]. If the system produces three consecutive beeps, then chime has been toggled to On. If the system produces one long continuous tone, then chime has been toggled to Off.

How do I adjust volume on Vista 20p?

If you have a keypad with voice annunciation, you can adjust the keypad’s voice volume by completing the following steps:

1. Access volume adjustment mode. Press [#] + [2] to enter volume adjustment mode.
2. Adjust the volume. Press [3] to increase the volume by one level.
3. Keep adjusting the volume.

How do I adjust the volume on my DSC alarm?

How to turn the volume up and down on LED keypad for a DSC Power Series and Power Series Neo Security Alarm Monitoring System:

1. Press * and then the 6 button on the keypad.
2. Enter your master Code.
3. Use the < Key to scroll through 21 total buzzer volume levels.
4. When you have chosen he desired level, press the # Key.

How do I clear my Ademco alarm?

Press the “Home” or “Away” button to arm the system, then immediately enter your access code and press “Off.” This action will reset the alarm to illuminate the low-battery signal to the system. The “Low Bat” indicator will go off, and the sensor number will be erased on the keypad of the master console.