How do I update the firmware on my HP blade chassis?

How do I update the firmware on my HP blade chassis?

Download and install Virtual Connect Software Utility (vcsu-1.7. 1-x86. msi), Is it needed for virtual connect firmware update….The right order in HP c7000 enclosure firmware upgrade :

1. Upgrade Onboard Administrator.
2. Upgrade Virtual connect modules.
3. Upgrade blade ROM firmware – on-line or offline.

How do I check firmware on HP blade server?

Complete the following steps:

1. Start up the server and navigate to the EFI Shell command prompt.
2. Determine the current firmware versions at the shell prompt by typing: Shell> info fw. Sample display: Shell> info fw.

How do I update the firmware on my HP Onboard Administrator?

Onboard Administrator firmware update

1. Login to Onboard Administrator.
2. Navigate to Active Onboard Administrator and click Firmware Update.
3. Click Browse and provide path to firmware.
4. You will see alert that updating Onboard Administrator firmware will cause reboot.
5. Wait for firmware update.

How do I update my VC firmware?

Upgrading firmware

1. Navigate to directory where is it installed and double click vcsu.exe.
2. Enter update.
3. Provide Onboard AdministratorIP Address.
4. Provide Onboard Administrator Administrator username.
5. Provide Onboard Administrator Administrator password.
6. Put location of firmware.

How do I setup my HP c7000 enclosure?

HP c7000 Enclosure configuration

1. Navigate to Enclosure Settings.
2. Navigate to Active OA and click OK.
3. Navigate to Active IPv4 and click OK.
4. Choose proper value – static IP configuration or DHCP and click OK.
5. Interface will direct you to Accept button.
6. Now you can enter your IP address.

How do I find my server firmware version?

Windows 7 and earlier:

1. Click on the Start menu.
2. Open Control panel> System> Hardware.
3. Select Device Manager.
4. Expand Disk drives.
5. Right-click on the drive and select Properties.
6. Select the Details tab and select Hardware lds from the drop down menu. The firmware version will be displayed on the far right.

What is c7000 enclosure?

A BladeSystem c7000 enclosure holds up to 16 server and/or storage blades plus redundant network and storage switches. It includes a shared, multi-terabit High-Speed Mid-Plane for Wire-Once connectivity of server blades to network and shared storage.

How do I set up OA?

Log in to the Onboard Administrator with the Administrator user account and the OA dogtag password. Set Onboard Administrator name: SET OA NAME 1 . If a redundant Onboard Administrator is present, set the name to: SET OA NAME 2 . Configure Onboard Administrator IP address.

How to upgrade hp c7000 enclosure firmware?

The right order in HP c7000 enclosure firmware upgrade : 1 Upgrade Onboard Administrator 2 Upgrade Virtual connect modules 3 Upgrade blade ROM firmware – on-line or offline More

What is HPE smart update manager?

Smart Update Manager (SUM) is an innovative tool for keeping the firmware, drivers, and system software of HPE server infrastructure and associated options up-to-date and secure. The Smart Update Tools (SUT) enable HPE OneView and iLO Amplifier Pack to stage and apply updates automatically to reduce IT operations.

How to upgrade the firmware of gracefully?

How the upgrade works, in a first stage VCSU (command line tool for Virtual Connect upgrade) upload firmware to both onboard administrator modules at the same time, if one use default parameter in upgrade process then utility will reboot GRACEFULLY one by one Virtual Connect modules – it takes about 40 seconds to activate new firmware.