How do I use spin only on my LG front load washer?

How do I use spin only on my LG front load washer?

For LG front load washers, turn the unit on and without touching the selector dial move to the spin speed selection button. Then press the button until you see your desired spin speed highlighted. Then press the Start button. The unit will drain any excess of water before it spins.

How do I force drain my LG front load washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

Why is my washing still wet after spinning?

The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. Often with this issue, whatever is causing it to not drain during the spin cycle means the water isn’t draining off fast enough and is essentially flowing back into the washer drum, re-soaking your clothing.

How do you spin only on a Bosch Serie 8?

To ‘Spin’ only with this appliance, turn the dial to the ‘Rinse/Spin’ program. You should see on the right hand LED screen that the Rinse Plus button is set by default for this programme. If you require a spin cycle only, press the button ‘Rinse Plus’ to deactivate the rinse function.

How do I get my Samsung front loader to spin only?

To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:

1. Power the unit on.
2. Press and hold the spin key for approximately 3 seconds. A chime will sound.
3. Select the spin level, if desired.
4. Press the Start/Pause button.

What is the spin option on a washing machine?

The spin cycle works to extract moisture from your clothes at the end of the wash cycle. The higher the ‘RPM’ the drier the clothes are, reducing additional drying time in either the tumble dryer or by hanging outside.

How fast do front load washers spin?

Most front-loading washing machines have spin speeds between 900 and 1200 rpm, according to Whirlpool. Certain front-loading washing machines will begin the spin cycle at a lower spin speed and gradually increase the rate of speed to “wring” clothes nearly free of water before the cycle ends.