How do you hang curtains without sewing?

How do you hang curtains without sewing?

Instead, you can just glue your project together with a hot glue gun. Clips and clip rings, mini-clip rings, and safety pins make quick changes easy, and you don’t even have to sew a rod sleeve (that little pocket of fabric at the top of a treatment where you push the rod through).

How do you make good curtain pleats?

Make several small stitches in the top of the lining hem and a few more on the next fold, leaving just enough thread between the two folds to allow them to hang straight. Repeat across the width of the drapes, turn them right-side out and voila: you’ve got perfectly folded drape pleats for days.

How do you make easy unlined curtains?

Making Unlined Curtains

1. Cut the fabric to the required size, allowing 10cm (4″) for side hems and adding 20cm (8″) to the length for top and bottom hem allowances.
2. Turn in a double 2.5cm (1″) hem at each side and pin.
3. Turn up a double 7.5cm (3″) hem at the lower edge and pin.
4. Mitre both bottom corners.

What are the easiest curtains to make?

The cheapest (and easiest) curtains to make are tab top. The panels aren’t as gathered so they use up less fabric than a pair made with header tape.

How do you make curtains without sewing?

To make sure the tape has fused to the fabric, go over it with the iron several times. You may want a hem at the bottom of the curtain. So you can follow the same steps as above and you will be able to have that hem done in no time at all. You have now learned how to make curtain without sewing a single stitch.

How do you make kitchen curtains?

How to Make Kitchen Curtains. Make a fold over the top 4 inches of the panels by pressing them towards the inside. Make a 2 inch hem by folding under 2 inches. Press the hem and stitch it. Ensure that you have stitched the hem close to the bottom seam. Now, hang the curtains or the valances on curtain rods.

How to make kitchen curtains?

– Multiply your fullness (1 1/2 to 3) by the width of your window. – Remember that a valance and a privacy tier are each one full-sized panel. – If you are planning to sew curtains, your panel length will be 1/2 of the full-sized panel length and you will need 2 panels per window. – Add at least 2 inches (5 cm) to the width and 6 inches (15 cm) to the length of your valance, tier or curtain design to account for seams, rod

How do you make a window curtain?

Making Simple Curtain Panels Decide how long and how wide you want your curtains to be. Add extra inches for hemming. Wash, dry, iron, and cut your fabric. Fold the side hems down twice to make the hems. Topstitch the hems down. Fold the top and bottom hems down twice. Topstitch the hems down. Snip off any loose threads, then hang up your curtains.