How do you lubricate an outboard throttle cable?
Pour enough motor oil into the bag to fully submerge the end of the cable jacket and zip the bag closed. Place a container beneath the bottom end of the cable to catch the oil that should eventually drip out of the lower end of the jacket. Allow the cable to hang until the oil drains through.
What is throttle drop?
What’s Throttle drop? When you have to push the throttle past where you actually want it to go, so it can drop back down to where you want it.
How do you loosen a sticky throttle cable?
Pour penetrating oil into the cable (Photo 1). Grab the inner cable with pliers and work it up and down to loosen it. When the cable moves freely and all the penetrating oil has drained out, squirt silicone lubricant into the funnel to keep the cable sliding freely. Reinstall the cable (Photo 2).
What is throttle drop jet boat?
What does a throttle control module do?
Engine Control Module. The engine control module (ECM) is the control center for the throttle actuator control (TAC) system. The ECM determines the drivers intent and then calculates the appropriate throttle response. The ECM achieves throttle positioning by providing a pulse width modulated voltage to the TAC motor.
What are the controls on a boat?
Boat Controls. It works on all types of boat with outboard, inboard or I/O power, gas or Diesel. – Dual action, throttle and shift in one lever. – You can operate both throttle and shift for 1 engine.
Why would the electronic throttle control light come on?
What causes electronic throttle control light to come on. As a fail-safe, the system can selectively kill cylinders to maintain engine speed control as a safeguard against engine runaway. I had one instance about a year ago where a piece of debris from a recent air filter element change lodged in the ETC throttle body, holding it open and producing similar symptoms.
What is a throttle cable on a boat?
On most boats, the throttle consists of one or two levers connected to the engine by cables. On smaller outboard motors , the throttle is controlled by twisting the hand grip on the engine’s tiller arm.