How do you prep EDP coating for painting?
Start by scuffing, applying a primer, sanding, then applying your final paint and clear coat layers. When EDP is scuffed, it provides an ideal surface for primer and paint adherence, so you don’t need to waste time trying to remove it completely.
What is e-coat process?
E-coating is an immersion wet paint finishing process that uses electrical current to attract the paint product to a metal surface. The E-coat process is a dipping (immersion) system very similar to what is used in metal plating except the finish uses organic paint particles not metal particles in the immersion baths.
What is black EDP coating?
E-Coat / EDP E-coating also known as EDP or Electrophoretic Deposited Paint is a Black semi-gloss paint. Key Benefits of E-coating. High corrosion resistant Paint 840hours on NSS. Increases up to 2,000 hours when e-coat over zinc plating depending on zinc thickness.
How do you do EDP coating?
Procedure: A metal part is first immersed in a water-based solution that contains emulsion. Then, we use an electric voltage to do the trick – the paint emulsion is thus condense onto the part. The surface, both inside and outside of the part, will be covered with a layer of paint.
How thick is e-coat?
Typical electrocoat systems operate in film thickness ranges of between 18 and 28 microns. However, some electrocoat applications only deposit between 8 and 10 microns for clear acrylic electrocoats, and others deposit 35-40 microns for epoxy electrocoats used in tough environmental conditions.
Is e-coat a primer?
Most Original Equipment Manufacturer (OEM) parts come from the factory with a primer called e-coat. E-coat stands for Electro-deposition Coating. The part is dipped into a primer bath and the e-coat adheres to the part with the help of an electrical process. Most e-coat appears to be a glossy black coating.
Can you powder coat over EDP coating?
A. Yes! Powder coating is being applied very successfully over E-coat in many applications today in several major industries. If the E-coat film is cured properly, there should be no problem with inter-coat adhesion.
How do you paint over EDP coating?
Start by scuffing, applying a primer, sanding, then applying your final paint and clear coat layers. When EDP is scuffed, it provides an ideal surface for primer and paint adherence, so you don’t need to waste time trying to remove it completely. Here are a few common questions that we get about prepping, welding and painting over EDP coating: 1.
Why choose EDP painting company?
As one of New Jersey’s elite painting, wallpapering and flooring contractors, EDP Painting Company provides painting, wallpapering and flooring services for commercial, industrial and residential sites throughout NJ. Our professional crews provide a high attention to detail with each service provided.
What is EDP coating on replacement body panels?
Almost all of our replacement body panels for trucks, cars and SUVs come coated with a layer called EDP. This coating offers rust protection during transportation and until you install and paint the panels.
Can I leave the EDP on when replacing my roof panels?
If using an adhesive to secure your new panel, you will want to get a good metal-to-metal contact wherever the adhesive will be placed on both panels. You can leave the EDP on if you are going to be riveting for an extra layer of corrosion protection — such as for slip-on panels like rocker panels that are sometimes secured in this way.