How do you read a digital electric meter?

How do you read a digital electric meter?

Read the meter from left to right, including all the zeros before the numbers. If a dial is between numbers, record the lower number. The exception is when the dial sits between 9 and 0, note down 9. If your meter has two readings marked with ‘L’ and ‘H’, read both.

How do I read my digital electric meter at home?

When reading an electric meter, read and write down the numbers as shown on the dials from right to left. When the pointer is directly on a number, look at the dial to the right. If it has passed zero, use the next higher number. If it has not passed zero, use the lower number.

How do you read a digital smart meter?

To read the meter:

1. press the middle button – it should say ‘R1’
2. write down the number below ‘IMP’ from left to right – this is usually your night or ‘off-peak’ reading.
3. press the middle button again – it should say ‘R2’
4. write down the number below ‘IMP’ from left to right – this is usually your day or ‘peak’ reading.

What do the numbers on a digital electric meter mean?

Digital electric meters have numeric displays that show numbers in kilowatt hours. A kilowatt is equal to 1,000 watts. If you have a 100-watt light bulb that is turned on for one hour, then 100 watt hours or 0.1 kilowatt hours is consumed.

Which is the correct reading of the meter?

To determine your correct meter reading, simply read the dials in order from right to left. As you read each dial, write down the number. In most cases, the pointer will be between two numbers on the dial. THE CORRECT NUMBER IS THE LOWER OF THE TWO, EXCEPT WHEN BETWEEN THE 0 AND 9, IN THAT CASE YOU WOULD READ THE 9.

Do smart meters need reading?

You don’t need to take any readings with a smart meter, it will do that automatically. But if you want them for your own peace of mind, you can still get them.

How do you read a smart meter first utility?

Read your smart gas meter

1. Pressing button ‘9’ on the meter’s keypad will supply read information.
2. A single button press will show your total read used for billing purposes, displayed as ‘volume’ followed by the read itself in m3.

What is electric meter reading?

Meter readings tell energy suppliers how much gas and electricity you are using. If you don’t give your supplier meter readings they will estimate your usage. You usually end up paying too much or too little on estimated usage. Safe to say, it’s better to pay for your exact usage by giving meter readings.

Can digital electric meter be faulty?

If the meter stops, turn on 1 appliance at a time and check the meter. If the meter starts to move very quickly, the appliance could be faulty. If the meter is still moving, it’s probably faulty.