How do you read kitchen cabinet sizes?

How do you read kitchen cabinet sizes?

How to Read Cabinet Sizes

1. Watch for the order of the dimensions that determine the size of cabinets.
2. Look for the cabinet size that starts with “W.” This size might read “W2440.” This means that the cabinets will be 24 inches wide and 40 inches high.
3. Assume the depth.

What are standard kitchen cabinet sizes UK?

Kitchen cabinets are usually 60 cm deep and have widths that are multiples of 10 cm or 15 cm. This sizing is illustrated by the base units shown below. Drawer units are usually offered in a variety of widths. Larder units are usually 30 cm wide and appliance units 60 cm wide.

What is the standard size of an upper kitchen cabinet?

What is the standard size for upper kitchen Cabinets? The average wall or upper kitchen cabinets are 30”-42” in Height, 12”-24” in Depth, and 9”-36” in Width.

How do you measure cabinet width?

Lay the tape measure along the bottom of the cabinet; place the end against the back of the cabinet, then pull out the tape until the front edge of the cabinet to find the front-to-back (depth) measurement. Next, measure the total outer width of your cabinet.

How do I identify my kitchen cabinets?

Cabinet brands that belong to the Kitchen Cabinet Manufacturers Association (KCMA) will have a sticker on the back side of the sink door or side wall of the cabinet. On the sticker there should be a code or the cabinetry name in the middle of the label.

What is a good size kitchen in meters?

Average kitchen size in meters 6.5 square meters for a small kitchen in apartments & condos. 14 square meters for single-story homes. 16.25 – 18.58 square meters in multi-story homes. 22.11 square meters for a large kitchen is larger homes.

What height are Wren kitchen units?

870mm is the height of your base cabinets including the 150mm plinth so this will give you the level position for the top of each cabinet. Check how square your kitchen corners are if you have included any base corner cabinets in your kitchen.

What is the height between countertop and cabinets?

18 inches
“The standard distance is 18 inches” from the top of the counter to the bottom of the wall cabinet, Scott says. “But we subscribe to the Scandinavian design aesthetic, and we often put cabinets higher—say, 24 inches above the counter, or even more.

How do you size cabinets?

Measure the cabinet opening: Measure in the same fashion as for a single door, getting the total width and height from the inside edge of the cabinet opening. Add space for door overlay: Add 1 inch to the height of the opening. For the width, add 1 inch to your total width and then divide by 2.