How do you reheat Waxoyl?
Place your can in the warm water for 5 minutes and keep topping the level up with warm water. Do this for both the gallon tin and the 1 litre tin, or whichever combination you’ve purchased. This helps gently warms the Waxoyl, making it more fluid and easier to spray. Waxoyling on hotter days will also help with this.
Does Waxoyl go hard?
I think you will have to wait quite a while for the black Waxoyl to dry as it isn’t supposed to go totally hard. I’d put on disposable gloves and turn the chassis over. Reassemble and then finish off the Waxoyling. On my new galv chassis I etch primed and then used polyurethane household paint.
How do you thin down Waxoyl?
Setting the can in very hot water for a while prior to injecting or spraying works well too if you are looking for other ways to thin. Have fun, stay clean!
Does Waxoyl stop rust?
Treating with Waxoyl will kill rust and prevent its continued spread. Waxoyl is very effective at stoping rust and treating rust and provides a good anti rust coating. Car undersealing involves the use of underseal and other Waxoyl products.
Can I brush on Waxoyl?
You can actually use a good quality garden sprayer – the type you pump up to pressurise – to ok effect if you thin the waxoyl with white spirit. Oh so a paintbrush is okay then.
How do you prepare Waxoyl?
Waxoyl Professional Corrosion Prevention requires minimal surface preparation. We recommend pressure washing the underbody and using a degreaser to remove unwanted material and allow Hardwax to bond directly to the metal or paint surfaces.
Can you use Waxoyl on wood?
Waxoyl will be as good as anything to use, dilute it with white spirit before application so it soaks into the woodwork. Hope you enjoy the smell.
Which is better Dinitrol or Waxoyl?
Dinitrol is far easier to apply than Waxoyl as it has been shown that Waxoyl can be affected by the changing weather. In a report that was carried out it showed that Waxoyl doesn’t seem to penetrate any significant amounts of rust whereas Dinitrol did fill in those gaps.
How do you warm up Waxoyl spray?
Place your can in the warm water for 5 minutes and keep topping the level up with warm water. Do this for both the gallon tin and the 1 litre tin, or whichever combination you’ve purchased. This helps gently warms the Waxoyl, making it more fluid and easier to spray.
How do I apply Waxoyl professional 120-4?
Do not squeeze the tins into the guns, if the product is too cold to flow easily from the tin then it wont apply well. Place in hot water for a few minutes. Waxoyl Professional 120-4, the cavity treatment, is clear and makes little mess and cleans up easily. Hardwax is black and if applied carelessly is potentially messy.
Can you paint over Waxoyl?
As has been said you can’t paint over waxoyl it forms a flexible water proof coating over metal and paint, it evens keeps water off existing rust so stopping its progress. (Rust needs water and air.) JoeMcb, on Jul 23 2007, 09:18 PM, said:
How long does it take for Waxoyl to dry?
Once you’ve completed the application, Waxoyl should be dry to the touch in around 6 hours depending on the weather and temperature applied in. However, before you pack everything away, give the vehicle one last inspection to make sure you’ve not missed any patches of metal.