How do you reset the airbag light on a VW Beetle?

How do you reset the airbag light on a VW Beetle?

How to Reset a VW Beetle Airbag Module

1. Shut off the engine.
2. Press the reset tool’s “Select” button until the red and yellow lights light up.
3. Turn on the ignition but do not start the car.
4. Press the tool’s “Enter” button for 10 seconds until its lights come on.

What is an airbag igniter?

The igniter is the interfacial mechanism that converts an electrical signal into heat which then activates a series of pyrotechnic materials which ultimately inflate the airbag, all in a matter of milliseconds.

How do I get my airbag light off?

How to Reset an Airbag Light

1. Put the key into the ignition and turn the switch to the “on” position.
2. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
3. Repeat Steps 1 and 2 two more times.

Can you drive a car with the airbag light on?

Is it safe to drive with an SRS light on? It doesn’t necessarily mean that the car isn’t safe to drive but it’s like playing with fire if you do. When this light is on it means your safety system isn’t working at 100% and in some cases, it could mean that your airbags are disabled and will not deploy in an accident.

What does the code 01217 mean on the airbag light?

01218 – Side Airbag Igniter; Passenger Side (N200) 001 – Upper Limit Exceeded – Intermittent – MIL ON. If you get code 01217, that is the drivers side. Tried clearing the code which was successful but anytime someone sits in the passenger seat it kicks on the air bag light on the cluster. Did some research and came up with the following:

What does the code 01217 mean on a Toyota Corolla?

01218 – Side Airbag Igniter; Passenger Side (N200) 001 – Upper Limit Exceeded – Intermittent – MIL ON If you get code 01217, that is the drivers side. Tried clearing the code which was successful but anytime someone sits in the passenger seat it kicks on the air bag light on the cluster.

How to clean the yellow side airbag connector?

1. Removed the Passenger seat to get access to the yellow side airbag connector. 2. Disconnected the connector from the seat, Inspected wires, routing, pins and crimps as well. Sprayed with electrical cleaning spray several times (used the nozzle so solution gets well inside the socket and pin side).

What does code 01217 mean on a Ford Explorer?

001 – Upper Limit Exceeded – Intermittent – MIL ON If you get code 01217, that is the drivers side. Tried clearing the code which was successful but anytime someone sits in the passenger seat it kicks on the air bag light on the cluster. Did some research and came up with the following: