How does mid-side Micing work?

How does mid-side Micing work?

Mid-Side is a coincident technique, meaning that both mics are placed as closely as possible to each other and the stereo image is created by differences in loudness rather than time delays, on which other stereo miking methods rely. Mid-Side uses a mid mic, which usually has a cardioid pattern, but can also be omni.

How do you mix mid-side?

5 Mid-Side EQ Techniques

1. Adding Stereo Width to Create a Fuller Sound.
2. Mixing Bass to Achieve a Tighter Low-End.
3. Mixing Vocals To Sit Perfectly in the Mix.
4. Mixing Drums to Create a Tighter, More Balanced Sound.
5. Mastering the Final Mix to Create a Radio Ready Song.

How do you record double mid-side?

The double mid-side technique is an expansion of the mid-side technique. By simply adding a rear-facing mic we now have a system that can generate five channels of audio using only three tracks. Use a shotgun for the main mid mic, add a bidirectional mic for the side signal, and a cardioid rear-facing mic.

Is Mid the same as mono?

2. “Mid is the sum of left and right: M = L+R (this is the same as summing L and R to mono)” – So this means that when you sum L and R, when you listen to a mix in mono (like when you hit the mono but on logic’s gain plugin), you DO actually technically get all the content from both the left and right sides.

What is the property known as directionality?

Directional Properties. Every microphone has a property known as directionality. This describes the microphone’s sensitivity to sound from various directions. Some microphones pick up sound equally from all directions, others pick up sound only from one direction or a particular combination of directions.

What is mid side decoder?

About the Decoder The Radial Decoder is a microphone preamp and mid/side stereo matrix that allows the user to easily create M/S recordings without having to re-configure a recording console. Simply record a SIDE microphone while tracking and bounce to a stereo M/S image later.

What is a mid side matrix?

Midside Matrix Features Changing the stereo width in Midside Matrix is as simple as boosting or cutting the side signal. If you want to make a stereo source wider then try a +6dB sides boost.

What is mid-side technique in microphones?

Mid-side technique provides more control over the width of the stereo image as compared to other microphone recording techniques. Better still, this method allows for later adjustments to the stereo spread and the volume balance, even after the recording is done. Mid-side is actually pretty simple.

How to use mid/side audio processing effectively?

Here are a few tips and tricks for using Mid/Side audio processing effectively. If a track has multiple guitar parts, route them through a bus, using Mid/Side processing on the guitar bus. Automate the Mid/Side tool to boost the volume of the side channel during a chorus, or other section of the track.

What is mid/side and how do I use it?

Mid/Side originally came to be used effectively as a recording technique to enhance ‘space’ before stereo playback existed. The basic setup for recording in Mid/Side makes use of one cardioid microphone (mid) and one bidirectional (figure-eight) microphone (sides). Listening to the mid microphone signal will offer a mono image.

What is mid-side stereo miking?

The technique does require a bit more thought, but the advantages are well worth the effort. Mid-Side is a coincident technique, meaning that both mics are placed as closely as possible to each other and the stereo image is created by differences in loudness rather than time delays, on which other stereo miking methods rely.