How long does a Firex smoke detector last?
Smoke and carbon monoxide alarms must be replaced within the specific lifetime of the product, usually 5 to 10 years after the date of manufacture. Learn how to easily replace your old Firex alarms.
What is the difference between I4618A and I4618AC?
The differences in the I4618A and the I4618AC are technical differences in the electronic parts in the alarms. The two alarms are completely compatible and equivalents to each other and function similarly and have same patterns of beeps and LED flashes. The i4618AC is just the newest version of the model.
Why does my Firex smoke alarm keep going off?
The buildup of dust or the movement of insects in the unit’s sensing chamber can trigger the alarm. If the alarm goes off mostly at night, it’s likely that insects are getting into the sensing chamber. To prevent these false alarms, regularly clean the FireX smoke alarm and locate it to an area less prone to bugs.
Why is my Firex alarm blinking red?
Answer: The blinking or flashing red light every 40-45 is normal operation. This is a battery test the unit performs. When the battery is weak the unit will beep or chirp approximately once a minute and the red LED will flash approximately 4 times a minute.
Does Kidde make Firex smoke detectors?
This unit is a UL Listed product with a 5-year limited warranty. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home….Technical Specifications.
| Model: | i4618 |
|---|---|
| Warranty: | 5 year limited |
Does Kidde own firex?
Kidde acquired the manufacturer of Firex branded products in 2009 – Invensys Controls no longer manufactures or supports these products. If you own any of these products, they should be replaced with a current Kidde model.
How do you fix a Firex smoke alarm?
Disconnect the alarm from the electrical power (if applicable) and remove the battery. Hold in the test button for approximately 10-15 seconds. This will reset your alarm. Re-install your alarm after this procedure.
What kind of battery does a FIREX i4618 smoke detector use?
Kidde FireX i4618 is an AC/DC powered ionization smoke alarm that operates on a 120-Volt power source with 9-Volt alkaline battery back-up. Front load battery feature is easy access to the battery; you will not need to remove the alarm from the mounting bracket.
How do I connect Kidde i4618a to my FIREX system?
Install KA-F adapter and attach existing wiring to the alarm. The new alarm will now be interconnected and compatible with your Firex alarm system. The Kidde i4618A is an AC/DC powered, ionization smoke alarm that operates on a 120V power source with 9V battery backup. This alarm uses ionization sensing technology.
What is a FIREX hardwired smoke alarm?
Firex Hardwired Smoke Alarm – Firex I4618 i4618 Front-loading battery door allows you to change the battery without removing the alarm from mounting bracket Provides a Hush™ feature to quickly silence nuisance alarms
Can a FIREX i4618 replace an old FIREX model?
This Firex i4618 model can replace the following old Firex models: Since old Firex and new replacement have different wiring harness, the existing wiring harness needs to be changed. Replace the ceiling mounting bracket. Install KA-F adapter and attach existing wiring to the alarm.