How long will Cromapol last?
Drying Time: Up to 72 hours dependent on the ambient temperature. Shelf Life: 12 months under good storage conditions in original unopened containers.
How do I get rid of Cromapol?
To obtain the best result remove all surface debris and surface water using a stiff broom and power wash. Fungus, mould and lichens must be removed, additional protection against fungal spores can be achieved by applying Moss & Mould Remover. Oil or grease must be removed prior to application.
What is Cromapol used for?
Cromapol Acrylic Waterproofing Cromapol is liquid acrylic resin from Cromar Building Projects designed to prevent leaks on your flat or pitched roof. It’s dense in fibres and will cover very small gaps with the application of only one coat of liquid.
Can I apply Cromapol with a roller?
Cromapol can be applied easily using a brush, roller or a squeegee. For best results, it’s recommended that you apply Cromapol to a dry surface, however, it will tolerate damp surfaces too.
Can you use Cromapol on EPDM?
With both 20kg and 5kg tubs available, this waterproofing roof coating is perfect for virtually any roof size. If you’re experiencing a more severe leak in your flat roof, you may benefit from replacing your EPDM membrane.
Can you apply Cromapol in the rain?
It is recommended that Cromapol is laid in temperatures between 5-25 degrees. Cromapol is suitable for general waterproofing and sealing of roofs, pitched surfaces & for sealing flashings, will waterproof instantly even in damp or wet conditions, and will not wash off while curing.
Does Cromapol need primer?
Cromapol is an all-weather waterproofing solution, which is crafted from a unique acrylic formula. Unlike many other roof coatings Cromapol does not need a primer and only requires a single coat, therefore reducing the amount of labour required.
Can you felt over Cromapol?
Cromapol is available in Mid Grey, White, and Black. Waterproofing Protection of: Flat and Pitched Roofs, Roof Lights, Flashings, Fibre Cement Sheeting, Gutters, Slate, Asphalt, Lead, Metal and Roofing Felt (Primed).
Can Cromapol be applied in the rain?
Cromapol is a fibre reinforced liquid acrylic resin dispersed in solvent designed to prevent the ingress of water. Cromapol can be used without a primer and can be applied in damp or rainy conditions on almost all surfaces. Cromapol will waterproof instantly, even while wet, and will not wash off while curing.
How much Cromapol do I need?
Cromapol only demands a single coat to be effective, with 1kg – 2kg being necessary per square meter. This does not only reduce the labour involved, but also brings the cost of your entire project down.
Why choose cromapol roof coatings?
Unlike many other roof coatings Cromapol does not need a primer and only requires a single coat, therefore reducing the amount of labour required. Cromapol can be applied in both dry and damp conditions. This makes it the ideal solution for emergency repairs, which are often entirely unexpected.
How much cromapol do I need to waterproof my roof?
Cromapol only demands a single coat to be effective, with 1kg – 2kg being necessary per square meter. This does not only reduce the labour involved, but also brings the cost of your entire project down. Once used, this waterproof coating is not adversely impacted by extreme temperatures. This is due to its ability to reflect UV energy.
What is the best way to apply cromapol?
Cromapol is best applied using a brush or roller. It should first be applied in areas in which additional movement may occur. To achieve a thicker coating, a second layer can be applied.
Does the cromapol opqaue contain fibres?
Please note the Cromapol Opqaue does NOT contain fibres. Ashbrook Roofing offers free delivery for orders over £50 to United Kingdom postcodes excluding the Highlands, Islands and Ireland. Prior to shipment, we’ll let you know of our estimated date of delivery.