How many wallpaper do I need for a room?
A standard American roll of wallpaper gives you about 35 square feet, but waste and pattern matching usually takes this down to about 27 usable square feet per roll. Enter the total of all wall widths, in feet, in the room. Enter the height, in feet, of the room.
How many rolls of wallpaper do I need for one room?
Wallpaper rolls typically measure 33′ (10m) long and 21″ (535mm) wide. If the room you’re decorating has a ceiling height of 9′ (2760mm) you’ll get three drops of wallpaper per roll. Allow a few inches per cut length for trimming the top and bottom off each strip. Allow more if the wallpaper has a large pattern repeat.
How many drops are in a roll of wallpaper?
3 drops
There is normally 3 drops to a roll, any excess paper will do above doors and windows if needed.
How do I calculate how many rolls of wallpaper I need?
Divide the total surface area by the amount of usable wallpaper per roll.
- For example, if your total surface area is 480 square feet (45 m2) and each roll gives you 25 square feet (2.3 m2) of usable wallpaper, then 480/25 = 19.2.
- Round the answer up to the nearest number.
- Wallpaper is sold in single and double rolls.
How much wallpaper does 2 rolls cover?
Depending on the wallpaper sheet width, a double roll covers 57 to 61 square feet, while a single roll is 29 to 31 square feet. Remember, wallpaper only comes in double rolls, even though they price out the cost in single roll quantities. You can count on double rolls to always be twice as long as single rolls.
How do you calculate wallpaper?
Generally, in order to calculate how much wallpaper you need, use the following steps: First, calculate the wall area by multiplying the height of the wall by the width. Second, calculate the area of the wall you will not be papering (i.e. windows and doors) by multiplying the height by the width of each area you will not paper.
How to calculate for wallpaper?
Pick one corner of the room and measure along the wall to the next corner.
How do you measure wallpaper?
For wallpaper borders, simply measure the length needed and divide by the footage of the border roll to determine the number of rolls. This estimator will help you assess how much wallpaper you’ll need.
How much wallpaper do I need calculator?
To calculate the number of wallpaper rolls needed, take the distance around the room in feet and then take the height from floor to the ceiling. Pair your measurements up on the chart below to determine the number of rolls. For example, if a room was 24 feet with 8 foot ceilings, you would need roughly four rolls of wallpaper.