How much HP can a stage 4 transmission handle?
For the original poster, the stage four should be able to handle somewhere around 650-700HP. The weak point you have will be the factory output shaft, which can break under hard use conditions from around 650~, usually with a boosted launch or a big shock load.
Is a 48RE a 4 speed?
The 48re is a 4 speed. The only thing you can do would be to put an over/under on it.
Is the Dodge 48RE Transmission good?
Registered. The main weak spots, in general, of the 48RE are: line pressure, torque converter and the input shaft due to it’s locked 3-4 shift. Other than those, they’re a pretty good towing transmission.
How many speed is a 48RE transmission?
four-speed
48RE: An electronically controlled four-speed automatic transmission found in ’03 to’07 Dodges.
How much horsepower can a Allison 1000 handle?
Allison 1000, Six-Speed (‘07.5-’10) By the time the LMM-powered GMs hit the market, aftermarket tuning of the TCM had progressed enough to where the Allison could withstand 430 to 450-rwhp for extended periods of time—and 500-rwhp on occasion.
How much horsepower can a LB7 handle?
Max “reliable” HP I would go is 400rwhp. Anything from stock is a risk of breaking somthing. Ive seen rods bend before headgaskets blow. Generally, rods are good to 500-550, IMO, pretty much anything over 500 is taking a risk of bending.
What years was the 48RE used?
Chrysler 48RE Specs
| Transmission: | Chrysler 48RE |
|---|---|
| Predecessor: | 47RE |
| Model Years/Applications: | 2003 – 2007 Dodge Ram 2500/3500 |
| Case Material: | Aluminum |
| Max Input Torque: | 560 – 570 lb-ft (Chrysler strength designation “8”) |
What does 48RE stand for?
Follow along as we look at the origins, development, and installation of a Dodge 48RE transmission, which stands for: (4) four speeds, (8) level eight torque rating, (R) rear-wheel drive, and (E) electronically controlled transmission. Simpson Planetary Gearset.
What year did the 48RE start?
Chrysler 48RE Specs
| Transmission: | Chrysler 48RE |
|---|---|
| Type: | 4 speed automatic OD transmission |
| Predecessor: | 47RE |
| Model Years/Applications: | 2003 – 2007 Dodge Ram 2500/3500 |
| Case Material: | Aluminum |
How much HP can a LB7 transmission handle?
The point being made in that thread is to not exceed 50 HP in an LLY or 80 HP in a LB7, and do not exceed 100 ft lbs of torque in a LLY or 160 ft lbs of torque in a LB7 if you want the Allison to have a long life.