How much power does a 12ht make?
12H-T. The 12H-T is a 4.0 L (3,980 cc) inline 6, 12 valve OHV turbocharged direct injection diesel engine. Bore is 91 mm and stroke is 102 mm, with a compression ratio of 18.6:1. Output is 134 hp (100 kW) at 3500 rpm with 232 lb·ft (315 N·m) of torque at 1,800 rpm, on the stock configuration of 7PSI of boost.
What does 1HD FTE mean?
1HD-FTE. The 1HD-FTE is a 4.2 L (4,164 cc) straight-6 24 valve turbocharged diesel engine. Bore and stroke is 94 mm × 100 mm (3.70 in × 3.94 in), with a compression ratio of 18.8:1. The 4 valves per cylinder are actuated by the SOHC, by using bridges so each rocker actuates a pair of valves.
Whats the difference between 1HZ and 2Hz?
The difference is measured by the number of cycles of the 1Hz metronome. Positive values mean that the 1Hz metronome is leading the 2Hz one.
How much boost can a 12HT handle?
VX 12HT. mild mods is get a good quality manual boost controller 14/15 psi max on standard turbo i have upped mine to 12 to be on the safe side get a boost gauge and exhaust gas temp gauge .
Is 12HT a good motor?
I had a 60series cruiser with the 12HT motor in it and IMHO it is the best motor Toyota ever produced. It is strong, fuel efficient and it’s longevity is expected to exceed 600,000ks.
What is the difference between the 1HDT and 1HD ft?
I have had both of these engines and by far the 1HD-FT has more power and runs better than the 1HD-T. The FT has 24 valves instead of 12 and makes a huge difference on the power it produces and when it produces it.
Can you put 12HT Pistons in a 2H?
Since the 12HT and the 2H are supposed to be based on the same block, IMO it should be possible to mount the 12HT piston cooling (the oil-squiting) on the 2H.
What is the max power of a 12H-T engine?
What really limits the power of 12H-T is the IP. 110cc is the max volume it pushes out. That means you can’t get THAT much power out of the engine with stock (read= maxed out) IP. I don’t recall the numbers what is the max HP the stock IP is capable, something between 180-200HP?
How to get more power out of a 12H-T?
Gbentink (Graeme from Gturbo) has a number of threads of here on getting more performance out of the 12H-T. These include porting the head, stroking/boring and obviously turbo upgrades. If you want to get serious power then searching through his posts will be well worth your time.
What is the output rated current of a power supply?
The output rated current is dependent on the power rating of the power supply, higher values translate to high power and more expensive units.
What is the net output power of a turbine?
The net output power is the difference between the power produced by the turbine minus that absorbed by the compressors. Therefore, we are presented with a problem; we need to know the optimal value of vacuum to maximize the power produced by the plant.