How to configure Iomega StorCenter ix2?

How to configure Iomega StorCenter ix2?

Quick Install

1. Use the included network cable to connect the drive to your network router.
2. Use the included power cord to plug the StorCenter ix2 into your surge protected power source.
3. The device will power on automatically.
4. From a computer on your network, open a web browser and go to www.myiomega.com to set up your.

How do I reset Iomega StorCenter ix2?

Factory Reset

1. Choose one of the following options: Preserve users and folders.
2. From the After Reset drop-down menu, choose to Restart or Power off the Iomega StorCenter ix2-200 after the factory reset completes.
3. Click Apply.
4. In the pop-up confirmation, click Yes to perform the factory reset.

How do I reset my Iomega?

1. Expand the notification area on the taskbar and then double-click the Iomega Storage Manager icon.
2. Click the gear icon to open the Home Media Network Hard Drive Console.
3. Select “System” from the left pane and then click “Factory Reset.”

How do I factory reset my Lenovo IX2?

Lenovo Iomega IX2-DL

1. Run ix2-ng-4.1.408.34845.exe.
2. Disconnect the lan and power cables.
3. Plug in the usb.
4. While holding the RESET button plug in the power adapter and hold it for about a minute.
5. When the led on the usb starts flashing, showing that the system is reading the USB-disk, release the reset button.

How do I reset my Lenovo IX2 password?

Hello you should be able to use the Reset Button that is on the unit — Hold the RESET button for four seconds to reset security and network settings. This allows you to regain access if network settings are incorrect or you’ve forgotten your password.

How do I format my Iomega external hard drive for Mac and Windows?

Click Start (orb)> Right-click Computer> then select Management. Select Disk Management (left side colum). Right-click your external drive (which will probably be drive E or drive F etc.), and then click Format. Hope this helps you.