How to pair a scala rider?

How to pair a scala rider?

Check the scala rider is in Standby (single BLUE flash every 3 seconds). 3. To pair Bluetooth Channel 1 – press “V+” for at least 5 seconds until the RED and BLUE LEDs begin rapidly alternating. To pair Bluetooth Channel 2 – press “V-” for at least 5 seconds until the RED and BLUE LEDs begin rapidly alternating.

How to reset scala rider q2?

RESET INTERCOM PAIRING With the scala rider Q2 PRO headset turned ON, press and hold the CTRL Button for at least six seconds until the Red and Blue Lights begin rapidly alternating.

How do I pair my Scala Rider q3 to my phone?

Make sure Bluetooth is enabled on your phone/GPS/MP3 player.

1. Check the scala rider is in Standby (single BLUE flash every 3 seconds).
2. To pair Bluetooth Channel 1 – press “V+” for at least 5 seconds until the RED and BLUE LEDs begin rapidly alternating.

How do I pair my Packtalk slim to my phone?

When your PACKTALK SLIM appears in the list of available devices, select it. If prompted for a PIN or Passkey, enter 0000 (four zeros). The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds. If pairing is not completed within 2 minutes, the unit automatically returns to Standby.