How to remove immobilizer acura rsx?

Immobilizer is located right around the ignition. 1) Look under steering wheel, you should see three screws. 2) Use phillip screw driver to take them out. 3) Then separate the top and bottom covers by pulling apart.

How to remove ECU from acura rsx?

Remove the panel underneath the glove box. There are three clips that you have to press in using a small phillips screwdriver. Take a 10mm socket and remove the three bolts holding the ECU on. There are two on each side and on on the back next to the firewall.

Where is the ECU on a RSX?

It’s underneath the glove box..

How do I know if my RSX is a Type S?

02-04 all models had flat black nozzles. the other easy way to tell from the motor is to look for the black plastic intake manifold on a base, versus the aluminum/silver one on the type s.

What is PND ECU?

The auto PND ECU processes vehicle speed from a sensor on the automatic transmission. The K-Pro 4 has an input to process vehicle speed. When the auto PND ECU is used, the VSS signal wire must be moved to the K-Pro4 board to process.

What year RSX is best?

The 2006 Acura RSX Type-S Was One Of The Finest Cars From Honda’s Golden Era.

Does the RSX base model have VTEC?

Just incase you are dead serious about your question, yes it does have VTEC.

What ECU is compatible with KPRO?

PLEASE NOTE: IF YOU HAVE THE 2005-2006 RSX AND WISH TO USE THE KPRO YOU MUST SEND IN A 2002-2004 RSX TYPE-S ECU. NO OTHER ECU IS COMPATIBLE WITH THE THE 2005-2006 RSX KPRO. THE 05-06 KPRO REQUIRES AN ADAPTER HARNESS WHICH IS AN EXTRA $140.

Does RSX Type S have a turbo?

The HKS Acura RSX Type-S turbo kit uses the tried-and-true HKS GT2835 ball-bearing turbo that features a 56-trim compressor wheel spinning wildly in a . This combination of quick spool-up and high-end flow is tailor-made to generate a power curve ideal for the Acura’s zippy 2.0-liter power plant.