How wide is a Camaro rear end?
MEASURED ACROSS WHEEL MOUNTING SURFACE
| Year | Classic Vehicles | Width Rear |
|---|---|---|
| 68-72 | Chevelle with 10 bolt axle | |
| 89 | Trans AM (Disc brake) | |
| 76-80 | Camaro / Firebird | 60 ½” |
| 68-83 | Corvette | 59 ½” |
How long is a 7.5 rear end?
Although the 7.5-inch 10-bolt closely resembles the 8.5-inch housing, you can positively identify the Chevy 7.5-inch rearend by measuring it. The oval-shaped cover measures 8 5/16 inches by 10 9/16 inches. The distance between the bottom center bolt in the cover and its adjacent bolts is 3 1/4 inches.
Will a S10 rear end fit a Camaro?
The gears from the Camaro rear end will fit the S10 rear end, but the spool will not. The S10 rear end will have 30 spline axles and the Camaro rear end has 28 spline axles, unless someone has upgraded it to 30 splines. You will have a much stronger rear end with the 30 spline axles.
How do I know what size my rear end is?
Measure the diameter of the ring gear. This measurement equals the size of your rear end. Count how many bolts are on the inspection cover. If you have 10 bolts, then your Ford has a 7.5-inch or an 8.8-inch rear end.
How wide is a Chevy rear end?
The rear end on a chevy 10 bolt measures 10-15/16-inches wide by 10-5/8-inches tall.
How long is a Chevy 12-bolt rear end?
Unlike the various 10-bolts, the 12-bolt axle assembly has different components for cars and trucks. The passenger car 12-bolt has an oval-shaped differential cover, and it measures 1015/16 x 105/8 inches. This 1967 Chevy truck used a trailing-arm design with coil and leaf springs.
How long is a s10 rear end?
According to Chevy High Performance, the 7.5-inch was standard until 1993, when the previously optional 7.625-inch became standard. 1995 and newer S-trucks equipped with the high-output V6 were equipped with the 8.5-inch rear end.
Is a GT4 rear end posi?
All Quadrasteers have G86 posi units. Normal rearends may have G80 posi units. QS rears all came with either 3.73 or 4.10 gears. 3.73s will be GT4, 4.10s are GT5.
How long is a 10 bolt rear end?
The Chevy’S-10-bolt differential cover is oval in shape and measures 11 inches by 10.25 inches. It comes equipped with either A8. 5 inch oR8.
How wide is a 12-bolt Chevy rear end?
The rearend cover on passenger car 12-bolt rearends is oval, measuring 10-15/16-inches wide by 10-5/8-inches tall. It also has an upsidedown, V-shaped protrusion that is there to direct oil to the carrier bearings.
What kind of rearend does a 1982 Camaro have?
Currie ® F9 fabricated 9-inch rearends for 1982 thru 1992 GM F-body Camaro and Firebird models with factory torque arm suspension, provide a direct bolt-in solution for those looking to upgrade the rearend of their classic muscle car or restomod build.
What are the dimensions of a Camaro rear axle?
The following dimensions are consistant across all 3 style rear ends. – Axle tube flange to axle tube flange: 55.25″ – Between centerlines of spring seats: 45 3/8″ – Axle shaft length: 30 5/32″ Camaro Rear Axle Identification & Decoding
What year is a 1982 Chevy Camaro Z28?
The full Terms and Conditions of using this website and database can be found here. Chevrolet Camaro Z28 5.0L V-8 (man. 4) , model year 1982, version for North America (since January) (up to November) 1982 Chevrolet Camaro Z28 5.0L V-8 (man. 4) specs
Will a 1970 12 bolt rear differential fit into a Camaro?
The 1970 12 bolt version will bolt into any second generation Camaro and quite often is done so in high power applications. Description – Three piece housing includes integral cast iron differential carrier and housing with pressed in and welded steel tubes.