Is 1176 a stereo?
An external stereo adapter (the 1176-SA) is needed if you want your 1176’s attack and release to track together. The unit has a STEREO / MONO switch, and therefore can operate in dual mono, but without independent controls for attack, release and ratio, you’re really only de-coupling the attack and release.
What is the best 1176 clone?
Purple Audio MC77 The MC77 became so popular in its own right that it has now been modeled as a plug-in – to my knowledge, it’s the first 1176 clone to receive this accolade. It’s definitely not the cheapest 1176 alternative, but it’s been around for a long time and has built a solid reputation of its own.
What type of compressor is the Urei 1176?
feedback
The 1176 is a “feedback” compressor. The signal goes through the input stage, via the line input transformer, which has a big impact on the sound. From there, the signal is routed to the top of a FET, which is being used as a variable voltage resistor.
Who made original 1176?
Bill Putnam
The 1176 Peak Limiter is a dynamic range compressor designed by Bill Putnam and introduced by UREI in 1967. Derived from the 175 and 176 tube compressors, it marked the transition from vacuum tubes to solid-state technology.
What is an 1176 compressor best for?
It offers no threshold control – just input and output dials, with the amount of compression decided by the input level. Sound-wise, the 1176 Peak Limiter can be many things, but it is probably best known for the energy and high-class grit it bestows, a musically-pleasing pushing of the tone in the lower mids.
Is the 1176 A FET compressor?
But know this: The designation between FET and VCA matters, because of the one of the most famous, widely used compressors of all time is an FET compressor—the previously mentioned UREI 1176. FET compressors like the 1176 are capable of exceedingly fast attack times, though not without color.
What was the first audio compressor?
Western Electric 110 limiting amplifier
1937 – ‘The Western Electric 110 limiting amplifier created, being considered to be the first commercially available compressor. 1980s – DAWs included Compression as standard in their software, rather than needing Compression Racks.
What is a vari mu compressor good for?
This type of compressor works best on the master/group bus as it glues sounds together into a single homogeneous sound. It can be used to add warmth and thickness to a sound. The most famous Vari-Mu compressor is the Fairchild 670.
What are 1176 compressors good for?
It can add a very useful, gritty compression effect. This setting is especially useful on bass, where compression and distortion might be needed at the same time, and the 1176 can provide both in a unique way. This trick also sounds great on screaming lead vocals.