Is 50 chain the same as 530?
Nowadays there is little to no difference between 50 and 530 chains, but the difference originated from where 50 chains were used in industrial applications whereas 530 chains were used primarily for transport and vehicles. Therefore 50 chains were traditionally more durable but heavier and more expensive.
Does a 520 chain make a difference?
A 520 conversion kit for is an easy way to save unsprung weight and gain performance. It may sound ridiculous, but by simply changing your regular 525/530 chain and sprockets to a 520, you’ll gain roughly 1.5hp on the dyno and save nearly a kilogram.
What Is a Number 50 chain?
# 50 chain is an American standard size that is built to ANSI B29. 1 standards. This size is commonly referred to as 5/8″ pitch roller chain, which comes from the pin to pin measurement. 50 chain is one of the most widely used chain sizes out of the 14 available ANSI standard chains.
Will a 530 chain fit a 520 sprocket?
A 530 chain on a 520 sprocket will work just fine, a 532 will not. The differance between a 520 and 530 is the width, the roller diamiter and pitch are the same.
How long does a 520 chain last?
525 or 520 is good for racing, but for long haul riding, I’d go to a chain and sprocket conversion to a 530 RK X Ring chain. You’ll get at least 20K out of that. Do you grease your chain enough? You should never see anything shiny when looking at the back of your bike.
How strong is a 520 chain?
The chain can carry up to 7,000 pounds per foot and comes with a clip-type master link that you can easily replace since it’s a 520 chain. Despite its design, it’s one of the best sportbike chains.
What pitch is 50 chain?
5/8″
50 Roller chain made to ANSI b 29.1 is 5/8″ or 15.875 mm pitch. It is available in single strand 50-1 duplex 50-2 and triplex 50-3. It is possible to have the chain up to 6 strands wide.
What size is a 50 chain?
Chain standards
| Size | Pitch | Maximum Roller Diameter |
|---|---|---|
| 50 | 0.625 in (15.88 mm) | 0.400 in (10.16 mm) |
| 60 | 0.750 in (19.05 mm) | 0.469 in (11.91 mm) |
| 80 | 1.000 in (25.40 mm) | 0.625 in (15.88 mm) |
| 100 | 1.250 in (31.75 mm) | 0.750 in (19.05 mm) |
How wide is a 520 chain?
520 Non-Standard Roller Chain
| Part No. | 520 |
|---|---|
| Plate Thickness (T) | 0.079 |
| Overall Width (F) | 0.344 |
| Overall Width (G) | 0.394 |
| Unit of Measure (Inches or Millimeters) | in |
How often should you replace motorcycle chain?
Depending on your bike your chain may require adjustments frequently or rarely, it really all depends. It’s common to have chains require more and more frequent adjustments as they become worn out, so if your chain has more than 10 or 15,000 miles on it you might want to start watching for signs of stretching.
What is the difference between a 520 and a 530 chain?
Motorcycle 520 chain has 5/8″ pitch and 1/4″ witdh. 530 chain has 5/8″ pitch and 3/8″ width. 630 chain has 3/4″ pitch and 3/8″ width. Most tensile strength of 530 chain is around 7400 to 9000 lbs.
What sets a 520 roller chain apart from others?
What sets this chain apart from others is that it is manufactured with solid rollers, and uses heat-treated components for better performance and a higher strength. This 520 roller chain also is supplied with a high-quality lubricant for additional working life.
What is the strength of a 50 chain?
Average tensile strength is 4,300lbs. Stainless ANSI chain is actually WEAKER in strength due to higher carbon content. #50 steel chain has 7,200 lb strength. #50 chain is the same pitch & width as 530 chain (5/8″ x 3/8″).
What do the numbers 520 525 and 530 mean?
The other numbers 520, 525, 530 basically refer to the increasing strength of the chain normally accomplished with progressively thickening the side plates. The internal dimensions should be consistent but the outsides and weight will grow