Is BB30 the same as PF30?

Is BB30 the same as PF30?

ARE PF30 & BB30 the SAME? No they are not the same. But they are also not all that different. 6806 is a number you’ll see describing the bearings used for both pf30 and BB30.

Is PF30 the same as BB92?

Short version is NO. Standard press-fit (AKA BB92) has a 41mm (or occasionally 42mm) bore and 92mm wide shell, PF30, which is a variation on BB30 has a 46mm bore, plus a shorter shell.

Is BB86 the same as PF30?

BB86, 386 Evo, BBright and OSBB are simply takes on the same standard, PF30.

What cranks fit PF30?

Crankset Standards

Crankset	Spindle Diameter	Bearings
GXP	24mm/22mm	24×37 (Drive) 22×37 (Non-Drive)
SRAM DUB	29mm	29×42
BB30	30mm	6806 (Drive) 6806 (Non-Drive)
PF30	30mm	6806 (Drive) 6806 (Non-Drive)

What is the difference between PF30 and BB386?

BB30 and Pressfit BB30 are based on a 68mm wide bottom bracket shell. BB386EVO has an 18.5mm longer spindle designed around an 86.5mm wide BB shell. Because the EVO BB shell is wider, the arms must have less curvature.

Is PF30 the same as BB386?

It will fit bike frames using either the BB386 EVO or the PressFit30 standard. The defining common feature is the 46mm inside diameter of the bottom bracket shell. This is the bearing set that you’ll need for installation of your BB386 EVO or BB30 crankset.

What is PF30 bottom bracket?

PressFit-30 (PF30) bottom brackets are a separate component pressed directly into the frame. The PF30 bottom bracket shell is typically 68mm (road) or 73mm (mtb) wide with an inside diameter of 46mm. The bearings are pressed into cups and the cups then pressed into the frame.

Is FSA a Shimano?

YES, FSA cranks work just fine with Shimano BBs and vice versa.