What are the different types of routing algorithms?
Routing Algorithms can be classified based on the following:
- Static or Dynamic Routing,
- Distributed or Centralized,
- Single path or Multi-path,
- Flat or Hierarchical,
- Intra Domain or Inter-Domain,
- link State or Distance Vector.
What is ISIS protocol in networking?
The IS-IS (Intermediate System – Intermediate System) protocol is one of a family of IP Routing protocols, and is an Interior Gateway Protocol (IGP) for the Internet, used to distribute IP routing information throughout a single Autonomous System (AS) in an IP network.
What is flow based and broadcast routing?
Flow routing is a network routing technology that takes variations in the flow of data into account to increase routing efficiency. Based on the traffic within this subnetwork, flow routing makes the decision about which computer to send a packet to.
What is the purpose of routing algorithm?
A routing algorithm is a procedure that lays down the route or path to transfer data packets from source to the destination. They help in directing Internet traffic efficiently. After a data packet leaves its source, it can choose among the many different paths to reach its destination.
What is the main purpose of router?
A router is a device that communicates between the internet and the devices in your home that connect to the internet. As its name implies, it “routes” traffic between the devices and the internet.
Which one of the following is a routing algorithm?
Discussion Forum
| Que. | Which one of the following routing algorithm can be used for network layer design? |
|---|---|
| b. | distance vector routing |
| c. | link state routing |
| d. | all of the mentioned |
| Answer:all of the mentioned |
What type of routing protocol is Isis?
Intermediate System to Intermediate System
Intermediate System to Intermediate System (IS-IS, also written ISIS) is a routing protocol designed to move information efficiently within a computer network, a group of physically connected computers or similar devices. It accomplishes this by determining the best route for data through a packet switching network.
What is the broadcast algorithm in TCP?
Broadcast algorithm 1: N point-to-point sends.send packet to every destination, point-to-point.wasteful of bandwidth.requires knowledge of all destinations Broadcast algorithm 2: flooding.when node receives a broadcast packet, send it out on every link.node may receive many copies of broadcast packet, hence must be able to detect duplicates
What is meant by the term routing in networking?
Routing. Routing is the process of selecting a path for traffic in a network, or between or across multiple networks. Broadly, routing is performed in many types of networks, including circuit-switched networks, such as the public switched telephone network (PSTN), and computer networks, such as the Internet . In packet switching networks,…
What is broadcasting in computer networking?
Overview. In computer networking, broadcasting refers to transmitting a packet that will be received by every device on the network. In practice, the scope of the broadcast is limited to a broadcast domain. Broadcasting a message is in contrast to unicast addressing in which a host sends datagrams to another single host identified by…
What is the difference between routing and packet forwarding?
In packet switching networks, routing is the higher-level decision making that directs network packets from their source toward their destination through intermediate network nodes by specific packet forwarding mechanisms. Packet forwarding is the transit of network packets from one network interface to another.