What are the hazard involved in eye and face protection of worker?
The guide provides examples of five common hazards – impact, heat, chemical, dust and optical radiation – that require eye and face protection.
What is eye and face hazard?
Three of the most common workplace eye and face hazards are flying objects, hazardous chemicals, and dust. And the most common of these three is flying objects. Flying objects are believed to cause the majority of workplace eye injuries, and more than half the objects involved are smaller than the head of a pin.
What are the potential eye hazards recognized by OSHA?
The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
Which of the following hazards require the use of eye protection?
Workplace eye protection is needed when the following potential eye hazards are present: Projectiles (dust, concrete, metal, wood and other particles). Chemicals (splashes and fumes). Radiation (especially visible light, ultraviolet radiation, heat or infrared radiation, and lasers).
When should we use eye and face protection?
When using eye and face protection you should do all of the following except: Always remove contact lenses or glasses before use. Safety footwear must meet __ minimum compression and impact performance standards. Which of the following types of protection is an employer required to pay for?
What does the eye hazard mean?
An eye hazard is any situation or material that has the potential to cause injury to the eye. They include situations, such as: Heat. Impact. Radiation.
What is the most common eye hazard?
1. Dust
- Dust. Dust is probably the most basic, most common eye hazard that workers face.
- Flying Objects. Another common eye hazard is flying objects.
- Chemicals. Eye injuries can also occur from chemical splashes, mists, vapors, and fumes.
- Optical Radiation.
- Penetration.
What is eye hazard?
What standards should eye and face protection meet?
Eye and face protection must meet ANSI Z87. 1- “American National Standard Practice of Occupational and Education Eye and Face Protection”. Safety eyewear can be worn over prescription lenses and should not disturb the proper position of other safety apparel.