What are the satellite coordinates for Shaw Direct?

What are the satellite coordinates for Shaw Direct?

The first two satellites (SAT A) are located at 107.3 west longitude; the other satellite (SAT B) is located at 111.1 west longitude. Your xKu LNB and elliptical dish will be aimed to receive signal from all three satellites.

Does Shaw Direct work in Florida?

Leave your satellite dish on the roof, and let SATELLITE BG help you get connected in Florida! Call now and ask how from the comfort of your Florida home, you can watch your popular Canadian television packages from Shaw Direct.

What should the signal strength be for Shaw Direct?

between 80 and 90%
the point of maximum signal strength, move dish back in the opposite direction until you achieve maximum signal. If your receiver installer menu displays signal strength of between 80 and 90%, you have successfully aligned the dish to the Shaw Direct satellite.

Does Shaw Direct satellite work in the US?

We brought our Shaw Direct satellite system with us, even though we were told it would not work for us down there. While it is for Shaw Direct, it should work for any satellite system. You just need to know what satellite(s) to point your dish at.

What satellite does Shaw use?

Shaw Direct uses both the Anik F1 (107.3°W) Anik F2 (111.1°W) satellites. It is important not underestimate the detail involved in pointing your dish accurately to obtain maximum performance.

What direction should a DirecTV dish face?

In general, start with a southern-pointing direction before testing. The Dish satellites are aligned to the south and will calibrate more easily when pointed in that direction.

What direction do satellite dishes face?

All satellite dishes in North America face south.

How do I fix my Shaw satellite signal?

If your signal issue persists or is affecting all satellite receivers, take the following steps to try to rectify it:

1. Verify connections at the receiver and (if possible) at the LNBF or multiswitch.
2. Trace the coaxial line from dish to receiver and bypass any splitters, joiners, or surge protectors on the line.

How to set up Shaw Direct south of Canada?

GUIDE TO SETUP SHAW DIRECT SOUTH OF CANADA: 1. If you are in south USA, or in Mexico, you will need 2 different offset antennas, one for. F1 satellite (107 degrees west), and one for F2 satellite (111 degrees west).

How do I Activate my Shaw Direct satellite receiver?

Aim the dish to the 107 degree satellite. Start pointing the dish bar gets green. Depending on your location, cloudiness, etc., you should get a signal from 50 to 80, with green bar. 10. (If you haven’t done so), call Shaw Direct, 1-888-554-7827, and activate your receiver.

What is the size of the dishes in Shaw Direct?

The size of the dishes will go from 76cm (south USA) to 1.2m (south Mexico). 2. Shaw Direct offers 2 different LNB configuations: Quad LNBFs or xKu LNBFs. In order to use the system with 2 antennas, you will need Quad LNBFs.