What are the smallest diameter pop rivets?
POP® Micro Rivets Our Micro rivets are 2mm aluminum open-end rivets designed for small micro-electronics applications. Designed with printed circuit board manufacturers and assemblers in mind, Micro rivets are some of the smallest blind breakstem rivets available anywhere.
What are the smallest rivets?
Considered to be some of the smallest POP rivets, Micro Rivets are 2mm diameter open-end rivets that offer quick assembly for applications with very tiny spaces.
What are the sizes of rivets?
Available Blind Rivet Sizes
- The diameter sizes available for blind rivets are:
- Metric series – 2.4, 3, 3.2, 4, 4.8, 5, 6.4 and 7.4mm.
- Inch series – 3/32, 1/8, 5/32, 3/16, 1/4 and 19/64″.
Are there different sized rivets?
Rivets are available in steel and aluminum, in three diameters and in three grip ranges. Determine rivet grip range by thickness of materials being fastened. Use washers when joining soft materials or when existing hole is oversize. It is important to select the correct length for your rivet.
How do you find the diameter of a rivet?
The proper diameter rivet would be 3 x 0.060=0.180 inches. A 3/16” rivet (0.188 inches) should be used. The metal thickness is 0.060+0.060=0.12 inches, and 1.5D is 1.5 x 0.188 inch = 0.282 inches, so the total length would have to be 0.12 + 0.282=0.402 inches for the rivet.
What size rivets should I use for gutters?
1/8” pop rivets are the best size for gutter work. Gutter Installation: At this point, another set of hands is very helpful. The proper amount of slope or drop for a gutter is 1/8” to 1/4” per foot; so, a ten foot long gutter should be 1-1/4” to 2-1/2” lower at one end than the other.
What is effective diameter of rivet?
Explanation: Effective diameter of rivet is taken as rivet hole diameter instead of nominal diameter of rivet. Rivet hole diameter is diameter of rivet + clearance. (i) button head rivet = 0.7d, (ii) flat countersunk head rivet = 0.43d, (iii) flat head rivet = 0.25d, where d=nominal rivet diameter.
What is a standard rivet size?
Rivets with diameters between 2-20 mm and lengths between 5-50 mm are common for general use. If the dimensions of rivets are not specified on the design drawing, you can determine the rivet size based on the following rules:
What are Riveter sizes available?
The most common machine is the impact riveter and the most common use of semitubular rivets is in lighting, brakes, ladders, binders, HVAC duct work, mechanical products, and electronics. They are offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long .
How to select your rivets?
How to Choose Rivets Choose a rivet that’s made of the same material as the items you are going to fasten. Select the correct length for your rivet. According to The Sheet Metal Handbook, the length of a rivet is measured from the underside of the head to the Compare blind versus solid rivets. Evaluate corrosion-resistance. Consider the diameter of the rivet.