What car has a B16A?
The B16A was first found in the 1989–1993 Japanese-spec Honda Integra RSi and XSi vehicles. It was also placed in the 1989–1991 Japanese-spec Honda CRX SiR and Honda Civic SiR/SiRII.
How much HP does B16A have?
In near-stock trim the turbo B16A ultimately produced 507 hp and 339 lb-ft of torque-a far cry from its 171hp naturally aspirated baseline. Remember that 500 hp worth of stock-block B16A goodness (except for forged pistons) was made possible by little more than some good old-fashioned tuning.
Which Honda VTEC is the best?
High-rpm flogging is not required but makes for storming good fun as the 2.0L turbo 4-cyl. pounds out 306 hp before reaching the 7,000-rpm redline. With a specific output of 153 hp/L, this VTEC engine is the most powerful street-legal Honda ever to reach America.
What did B16 come in?
B16A found in: 1989-1993 Honda Integra XSi. 1989-1991 Honda CRX SiR (EF8) 1989-1991 Honda Civic SiR (EF9)
Which is the fastest Honda?
Honda Civic Type R
The Honda Civic Type R is the fastest and most powerful car the company has ever sold in the US. The Civic Type R debuted in the US market in 2017.
What was the factory crank horsepower for the B16A2?
Power: 187 hp (139 kW; 190 PS) at 7600 RPM & 174 N⋅m (128 lb⋅ft) at 7500 RPM. Compression: 10.8:1. Bore x Stroke: 81 mm × 87.2 mm (3.19 in × 3.43 in)
What car did the D16Y8 come in?
In the United States the D16Y8 engine was found in Honda Civic EX models from 1996 to 2000. It also appeared in the Honda Del Sol Si until 1997.
What is the difference between Honda b16a6 and B16B?
B16A6 was an analogue for B16A2 Honda Civic for the countries of Middle East and South Africa. The power was 160 HP @ 7,800 rpm; and the torque was 150 Nm @ 6,400 rpm. 8. B16B was top version of B16. This engine was developed based on B16A SiR II, which was also quite powerful, but B16B was a new level.
What are the specs of the Honda Sir B16A engine?
Here are cam specs of SiR B16A: duration (at .050″ or 1 mm lift) 230/227 deg, lift 10.6/9.4 mm. The power was 160 HP @ 7,600 rpm, torque was 150 Nm @ 7,000 rpm, and the redline was at 8,000 rpm. This engine was installed in Honda Civic SiR, CRX SiR and Integra. 2. B16A SiR 2 gen. is the Japanese version of B16A SiR.
What is the horsepower of a B16A1 Honda Civic?
3. B16A1 was the version for the European market. The compression ratio was reduced to 10.2; its power was 150 HP @ 7,600 rpm and the torque of 150 Nm @ 7,100 rpm, with the rev limit at 8,200 rpm. It was created for Honda Civic and CRX.
Are there any problems with the Honda B16 engine?
Honda B16 engine problems and malfunctions. This may sound strange, but these engines have no problems and weaknesses; B16B and B16A are incredibly reliable and durable engines.