What does F02 mean on Hotpoint Dishwasher?

What does F02 mean on Hotpoint Dishwasher?

Water fill solenoid valve failure
F02 — Water fill solenoid valve failure.

How do I reset my Hotpoint Dishwasher?

Wait 2 minutes to reset the dishwasher if you press the “Start/Reset” pad. If the problem persists, you can reset the dishwasher by turning off the power to the unit for 30 seconds. The dishwasher should function normally if power is restored.

How do you diagnose dishwasher problems?

How to diagnose common dishwasher problems

1. Leaks. Dishwasher leaks are usually easy enough to identify.
2. Not Filling. If your dishes are coming out dry and dirty then your machine is not filling with water.
3. Not draining.
4. Not Washing.
5. Not taking the detergent.
6. Water is cold.
7. Excessive Noise.

Why does my Hotpoint dishwasher beep?

If your dishwasher starts beeping, it is probably a sign of either incorrect use or a part that needs replacing. Electronic appliances such as dishwashers often come inbuilt with electronic sensors, which may make beeping sounds or display blinking lights to caution the appliance user that something is wrong.

What does H mean on Hotpoint dishwasher?

He had never seen this code but took advice and decided it stood for H2O (water). He replaced a unit on the left hand side which has an impeller with a magnet in it and a little glass tube with 2 bits of metal. The magnet should open and close these 2 bits of metal indicating water flow.

Why is my dishwasher cutting out?

Reasons for a Dishwasher Stopping Mid Cycle If your dishwasher keeps beeping and stopping, the odds are that the door latch is loose. The reason why the dishwasher is stopping mid cycle is that the sensor on the door latch is shorted or is obscured. It could also mean that the door latch is simply broken.

How long do Hotpoint dishwashers last?

The typical dishwasher can be expected to last between seven and 12 years, with the average working expectancy being nine to 10 years. Certain factors, such as cost, quality, brand, care, maintenance and frequency of usage, can affect the life expectancy of a dishwasher.

When was the Hotpoint dwf3 dishwasher made in the UK?

Hotpoint DWF3 series and DC26 dishwashers manufactured between January 1999 to September 2003 and sold in the UK. See image for further details as to where to locate the model number. Hotpoint will then arrange to send an engineer to visit and repair your dishwasher, free of charge.

Are there any recalls on Hotpoint dishwashers?

Hotpoint DWF3 and DC26 Dishwashers Recall 1 Risk. An electrical component in the dishwasher models listed may fail, leading to overheating and the possibility of the appliance catching fire. 2 Models affected 3 Details. Hotpoint DWF3 series and DC26 dishwashers manufactured between January 1999 to September 2003 and sold in the UK.

How do I troubleshoot my Hotpoint Aquarius dishwasher?

Hotpoint Aquarius FDl570 dishwasher troubleshooting Problem: Possible causes / Solutions: The dishwasher does not starting or cannot be controlled • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the program. • The appliance has not been plugged in properly.

Why are thousands of dishwashers still missing from the market?

In May, an investigation found thousands of dishwashers remained unaccounted for following a separate safety recall over fire hazard concerns. More than 844,000 dishwashers were sold under two labels – Bosch dishwasher FD 7901 to FD 8504 and Hotpoint dishwasher with serial numbers beginning DWF3 and DC26 – with a fault that could cause fires.