What does F2 mean on a Kenmore washer?

What does F2 mean on a Kenmore washer?

F2. means that the machine contol has sensed a short or open contact within the interface/keypad switch. It can also be caused by using too much detergent or by blockage in the drain pump, drain hose or plumbing.

How do I clear the error code on my Kenmore washer?

How to Reset the FH Error Code on a Kenmore Elite Washing Machine

1. Look for the “Pause/Cancel” button on the washer control panel.
2. Press the “Pause/Cancel” button twice to cancel the wash cycle.
3. Connect the water supply hoses back to the washer and turn on the water spigots.

Why does my washer say F2?

: The “F2” fault code indicates it’s taking too long to drain the tub of water in order to reset the pressure switch. The problem is that the washer is not always able to drain water so that the water level switch can reset. This can happen if the wrong type of detergent is used or if you are using too much.

How do you unlock a Kenmore Elite he3t washer?

There is a tab on the bottom of the door lock assembly that you can pull until it clicks to manually unlock the washer door.

What does F2 mean on a Kenmore oven?

The “F2” fault code indicates the oven got too hot. Let the oven cool down before reconnecting the power cord. If “F2” displays when cold, this could indicate a faulty electronic oven control board or a faulty oven temperature sensor probe.

What does F mean on a Kenmore washer?

The F indicates that the washer control detected a component problem. If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.

What does F20 mean on a Kenmore washer?

water fill problem
@dilligaff F20 means that you have a water fill problem on the washer. ” If the washer is not filling when the F20 appears: Check to see if you have Flood Safe devices on the inlet water hoses to your washer. If you do, these devices could be causing your problem.

What does 03 mean on a Kenmore washer?

@ronhurley the error code “OE” is a “Drain error ” and it is initiated by your washer not having fully drained in 10 minutes. Most common cause is a clogged filter. Check your “coin trap” filter for retained objects, like missing socks etc.:-) To clean it.

What does f2e2 mean on Whirlpool dryer?

The Whirlpool Duet Dryer Error E2 means the control has detected that the thermistor is shorted. This error can be a wiring issue from the control to the thermistor or a bad thermistor. In some cases it can be a bad control reporting false errors but this is not common.

How do I force my Kenmore washer to unlock?

How to Manually Unlock a Kenmore Front Load Washing Machine

1. Touch “Control Lock” for five seconds until “CL” disappears from the washer’s display to unlock the control panel.
2. Press “Start/Pause” to manually pause the cleaning cycle.
3. Pull the door’s handle to open the door and add or remove the clothing from the washer.

What does F2 mean on Kenmore front load washer?

The F2 fault code indicates a problem with the washer’s drain system, and you must troubleshoot the problem to determine how to fix the washer and clear the code. Clogged or Kinked Drain Hose The drain hose on a Kenmore washer should remain free of obstructions so the water drains from the washtub.

What does F2 mean on a whirlpool washing machine?

When these codes appear, it could require one or more solutions to clear the code from the display. The F2 fault code indicates a problem with the washer’s drain system, and you must troubleshoot the problem to determine how to fix the washer and clear the code.

Why is my Kenmore washer displaying fault codes?

A Kenmore washer can display a series of fault codes that can indicate a problem with the appliance. When these codes appear, it could require one or more solutions to clear the code from the display.

Where is the filter on a Kenmore front load washer?

The round filter housing connects to the side of the drain pump and opens by grasping the raised handle and twisting it counterclockwise. Cleaning the filter every two or three months can avoid the clogs that are causing the F2 error code to appear on your Kenmore washer’s control panel.