What does it take to rebuild a transmission?

A transmission rebuild is a major mechanical overhaul done to a vehicle’s transmission. A transmission, like a vehicle engine, is made up of a series of interrelated mechanical parts that wear out over time and with extended use. Rebuilding a vehicle’s transmission replaces these worn parts without replacing the entire transmission.

What goes into a transmission rebuild?

Transmission rebuilds. The first step in a transmission rebuild is the complete removal of the transmission from the body of the vehicle. This is necessary when the part that is thought to be causing the problem is not accessible while the transmission remains within the body of the automobile.

How to rebuild a transmission?

To remove a transmission on most cars,drop the transfer case and remove it out the bottom,unbolt the engine mounts,unbolt the transmission from the crossmember and

Pull the engine and transmission as a single unit,following the transmission with a bucket to catch the fluid,then set the transmission on an overturned 5-gallon bucket

After the transmission is out,set the entire transmission in a bucket with the tailshaft assembly pointed down to drain out the rest of the fluid.

With the transmission upside down,unbolt or pry off the pan. The valve body has to be removed from the transmission before it can be rebuilt.

Take the valve body apart,carefully clean it and then put it back together.

The tailshaft assembly is the short,aluminum housing typically located on the rear of the transmission that adapts the transmission to the transfer case,which houses the parking

From here,you will begin to encounter a lot of bigger parts that will need to be taken apart before being reassembled: the accumulator piston and spring,the

Once the transmission is taken apart,the majority of parts are replaced,which may or may not include all the parts disassembled and cleaned; all clutch plates and

What is included in a transmission rebuild kit?

(1) Soft Parts: A complete Master Rebuild Kit (MRK). An automatic transmission rebuild kit contains all the parts that, by design are going to eventually wear out, and consist mainly of new clutches, bands, seals, gaskets, bushings, bearings and internal transmission sealing rings along with a new transmission filter.

https://www.youtube.com/watch?v=GWEaiWHrqyY