What does PC3 14900 mean?
PC3 means that the ram is DDR3, it is keyed to only fit in a ddr3 slot. The 14900 indicates that it is 1866 speed ram.
What is the difference between PC3-12800 and PC3L 12800?
6 Answers. PC3 is standard voltage (1.50V) where PC3L is low voltage (1.35V) – A system which requires PC3L cannot support PC3 RAM.
What is the difference between PC3 10600 and PC3-12800?
The 12800 refers to a data rate of 1600MT/s while the 10600 is 1333MT/s so the faster 4GB module will be underclocked to run at the slower 1333 rate for uniformity which should not cause any issues, as long as the timings also match, especially with performance since 1333MT/s DDR3 is plenty fast for average everyday …
Is DDR3/1600 the same as PC3-12800?
PC3-12800 (12800 MB/sec) is the same thing as DDR3 1600MHz (1600 MHz data transfer rate) and it runs at 800 MHz DDR clock. Similarly for others, just divide/multiply by 8. Any memory that has the correct voltage and capacity and is same or faster than what is supported by the board should work in the board.
Can I use PC3 10600 instead of PC3 12800?
Yes most computers that use 10600 can support 12800.
What PC3 12800?
PC3-12800 is a PC DRAM bus specification. All x86 based computers use a 64 bit wide memory channel. When that memory channel is populated with DIMMs that use DDR3-1600 DRAM chips, the bandwidth is 12.8 gigabytes per second.
Can I use PC3-12800 and PC3 10600 together?
PC3-12800 works just fine as PC3-10600 speeds. Think of it as a car capable of going up to 120kmph on a 100kmph highway. It will work just fine. Regular DDR3 DIMMs are designed to work at 1.5 volt.
What PC3-12800?
Which is faster PC3-12800 or PC3-10600?
Distinguished. I understand that PC3-12800 has a faster data rate (1600MT/s) while PC3-10600 is 1333MT/s. One’s faster than the other.
Can I use PC3-12800 and PC3-10600 together?
Can I use PC3-10600 instead of PC3-12800?
Can I mix PC3-10600 with PC3-12800?
You “can”, but it may cause major instability. It is good to have the same manufacturer and revision, but if you set them both down to the lowest settings, for example, 1333, 9-9-9-24, 1.5v or whatever the slowest is speed for, they should run fine.
Will a 12800s work with a PC3 motherboard?
The 12800S RAM The answer, unfortunately is not definitive. Usually, yes. But, because of no strict standardization enforcement it may not work. I’d say better to order DDR3 if that is what originally came with your motherboard. I bought 3 PC3L RAM different brands all did not work on my PC3 system.
Why won’t my PC3L-12800 memory work with my computer?
You have to check your CPU. If your computer uses 1’st generation of intel processors, which means it is using HM55 chipset, you computer might not work with PC3L-12800 memory. Was this answer helpful?
What is the difference between DDR3-1600 and ddr-1333?
This is the speed of the RAM Clearly DDR3-1600 is able to run faster than DDR-1333. But thats only the modules ability not what the system is running its memory bus speed at. Your MacBook was designed for PC3-10600 DDR3 SDRAM, its best to stick with what Apple expects.
What is the difference between PC3 RAM and PC3L Ram?
PC3 is standard voltage (1.50V) where PC3L is low voltage (1.35V) – A system which requires PC3L cannot support PC3 RAM. PC3L RAM will work in a PC3 based system as it will run at the standard voltage and will inter-operate with PC3 RAM within the system. This is the speed of the RAM Clearly DDR3-1600 is able to run faster than DDR-1333.