What does Slapback delay mean?
That’s what a slapback delay is, except it’s one single echo. One single repeat of the original signal. It’s more like you clap while standing in a small alley between 2 buildings, and hearing a very quick repeat of your clap. It’s a super fast repeat that adds a sense of space.
How long is Slapback delay?
40-120 milliseconds
A short single-repeat echo effect often heard in ’50s pop and rockabilly styles. Slapback delay is often used on electric guitar, but can also be applied to drums, vocals, and more. Delay times are usually short, in the range of 40-120 milliseconds, with the delay effect mixed up quite loud against the dry signal.
How do you set a delay on a guitar?
To get a nice Edge delay, try setting your first delay for about 350 milliseconds with about 30% feedback. Set your second delay for 520 seconds with 10% feedback. And if you really want to sound like The Edge, you also need two amplifiers—with delay signals ping-ponging back between the two.
What does the Slapback effect do?
About Slapback Delay Slapback delay is a very popular type of delay as it can be used in a few different ways. From doubling up your licks to make them sound thicker to harmonizing over the top of yourself, the slapback can give you a lot of freedom as a guitarist.
How many milliseconds is a Slapback?
You’re best off using a tape-style delay setting, but you can achieve this sound with any pedal. Slapback needs to be snappy, so your delay times will be short – anywhere between 70–150 milliseconds.
What is the delay time on a slapback delay?
Delay Time: Between 90 and 130ms but it’s tempo dependent!) “Slapback” is a very common delay effect used extensively in Rockabilly and Country guitar and a lot by the Blues greats as well. Was super popular in the 50’s and 60’s and has a cool retro sound.
How do you add reverb to a slapback delay?
To add reverb to your slapback delay, I’d advise setting that knob low, around 30%. Anything higher is going to cloud out your delay tone, which is subtle to begin with. A small amount of reverb will add that extra layer that gives you a more analog feel and vibe. Just make sure you don’t overdo it.
Which delay pedals are best for slapback music?
Traditionally, analog delays are the weapon of choice when it comes to slapback and rockabilly-style delay sounds. Moreover, they’re generally preferred for their more organic tone and bucket-brigade circuitry. The only problem is there are a lot of great digital delay pedals that are available now.
What is the best EQ for a slapback delay?
For a slapback delay you’ll want to create a somewhat brighter response that allows the “pop” and grit of the slapback sound. Think lead country tones like Brad Paisley or the sound of snappy finger-picking. From our own amp settings guide, I pulled the following EQ: