What is 49 4C02 service error?

What is 49 4C02 service error?

49.4C02 error in HP printers is a well-known error among users that halts all the operations being performed on the printer and asks for restart. That could be easily caused by certain PDF files one is trying to print or an outdated firmware version of that printer.

How do I fix Error 49.4 c02?

When your printer displays the HP error code 49.4c02, it’s usually caused by a print job….

1. Delete any jobs in the print queue.
2. Print a test page.
3. Disable Advance Printing Features.
4. Check whether you’re using the Franklin Gothic Book font.
5. Flash and update the firmware.
6. Contact your printer’s manufacturer.

What is error code 79 on HP printer?

What is HP service error 79? Service error 79 on HP printers indicates that the print job is corrupted or the printer firmware is outdated. As a result, the spooler fails to communicate with the printer.

How do I fix 79 service error?

If you get the 79 service error turn off the printer, then on. It’s a basic solution that you can try first….

1. Error 79 turn off then on. Turn the printer’s power off.
2. Reinstall the DIMM. 2.1 Remove and install the DIMM again.
3. Reinstall the drivers.
4. Contact HP Support.

What is a DIMM on a printer?

The printer has three dual in-line memory module (DIMM) slots for upgrading with: More printer memory. DIMMs are available in 4, 8, 16, and 32 MB, for a maximum of 100 MB. Unlike standard printer memory, flash DIMMs can be used to permanently store downloaded items in the printer, even when the printer is off.

What does 79 service error mean on my HP printer?

Service error 79 on HP printers indicates that the print job is corrupted or the printer firmware is outdated. As a result, the spooler fails to communicate with the printer.

How do I remove DIMM from my printer?

Loosen the two captive thumb screws on the back of the printer. Grasp the screws and pull the formatter board out of the printer. Place it on a flat, non-conductive surface. Remove the DIMM from the antistatic package.

Can I use SDRAM instead of DIMM?

Yes, SDRAM is the same thing as DIMM basically.